Inova Solutions OnTime 4-Digit Digital Clocks - User Manual

Summary

Safety Instructions

Installation

Power over Ethernet Cabling Plan

Sites with PoE Enabled Network Equipment

Sites with no Existing PoE Equipment

Power Up and Verification

Configuration

Clock Configuration

Details the key configuration items needed for the clock, including IP address and time server.

Using DHCP for Addressing and Configuration

DHCP Configuration

Details how DHCP options are used to configure network devices like the OnTime Clock.

DHCP Configuration Settings

Lists the necessary DHCP settings for the OnTime clock to display the correct local time.

DHCP Configuration Test and Rollout

Creating a DHCP Configuration String

Explains how to construct a DHCP configuration string for automated clock setup.

Verifying the DHCP Configuration Settings on a Clock

Telnet Configuration

Establishing a Telnet Connection to the Clock

Details the steps required to establish a telnet connection to the OnTime Clock.

Assigning an IP Address

Explains the two methods for assigning an IP address to the clock: DHCP and static.

DHCP

Refers to Section 6 for DHCP information, indicating it's the factory default.

Static IP Address

Provides instructions and command syntax for setting a static IP address for the clock.

Specifying a Time Server

Setting the Time Zone

Configuring Daylight Saving Time

Troubleshooting

Appendix A: Clock Configuration

Inova Solutions OnTime 4-Digit Digital Clocks Specifications