To Next PageTo Next Page
Need help?Do you have a question about the Inovance MS1H1-20B30CB and is the answer not in the manual?
General| Rated Power | 20 kW |
|---|---|
| Peak Power | 40 kW |
| Voltage | 380 V |
| Protection Level | IP67 |
| Cooling Method | Water cooling |
Details changes made to the document over time, including edition and updates.
Outlines the limitations of liability and responsibilities regarding product use and safety.
Guides users to a separate manual for detailed safety instructions for high-response servo motors.
Explains how to interpret the motor's nameplate and understand its model designation.
Describes the physical components of the servo motors with diagrams for different frame sizes.
Provides detailed technical specifications, including mechanical characteristics and ratings for various models.
Lists available cable types, models, and lengths for different motor series and frame sizes.
Details the connector kits and optional battery kits required for motors with absolute encoders.
Covers essential aspects of installing the servo motor, including location requirements and environmental conditions.
Provides detailed instructions and diagrams for connecting power cables and encoder cables to the servo motor.
Provides dimensional drawings and specifications for motors with a frame size of 40mm.
Provides dimensional drawings and specifications for motors with a frame size of 60mm.
Provides dimensional drawings and specifications for motors with a frame size of 80mm.
Provides dimensional drawings and specifications for motors with a frame size of 100mm.
Provides dimensional drawings and specifications for motors with a frame size of 130mm.
Provides dimensional drawings and specifications for motors with a frame size of 180mm.
Illustrates motor models with front or rear cable outlets and explains plug core adjustment.
Shows detailed drawings of various cables (power, encoder) for front cable outlets.
Shows detailed drawings of various cables (power, encoder) for rear cable outlets.
Provides visual representations of different connector models used with the servo motors.
Explains the procedure for removing the flat key from MS1 series motors using a bolt and Allen wrench.
Details the tools and steps required to safely remove the motor's oil sealing using pliers.
