Inovelli RED Series User Manual

www.inovelli.com/lzw31-sn/setup contact@inovelli.com page 10
Switch Cheat Codes
Below is a chart that will help you understand what your switch is doing so you don’t get lost in a sea of RGB colors and LED strobes.
Figure 1.3 - Switch Parameters & Default Settings
LZW31-SN | Dimming Switch
Red Si
Switch Parameters
Below you’ll find the various parameters associated with your switch. There are a ton of options for customization and as you can
imagine, it’s hard to write out all the possibilities in a manual. Please use this as a guide, but also feel free to check out our site
where we’ll give some specific examples using each parameter.

Inovelli RED Series Specifications

General

Model Number	LZW31-SN
Protocol	Z-Wave Plus
Z-Wave Chip	700 Series
Operating Temperature	32°F to 104°F (0°C to 40°C)
Neutral Wire Required	Yes
Operating Frequency	908.42 MHz (US)
Load Type	Incandescent, LED, CFL
Dimming Range	0-100%
Voltage	120V
Load Capacity	300W LED
Features	Scene Control, Energy Monitoring, Smart Bulb Mode
Certifications	UL, FCC
Associations	5 Groups
LED Indicator	RGB LED
Color	White (Changeable Paddle)
Range	Up to 100ft line of sight
Warranty	2-Year