This document provides assembly instructions and care guidelines for an Inside Weather sofa sectional.

Function Description:

The Inside Weather sofa sectional is a modular furniture piece designed for comfortable seating in a living space. It features a main sofa unit and a chaise lounge extension, allowing for flexible configuration. The design incorporates a sturdy frame, support braces, slats for cushion support, and various cushions for comfort. The modular nature of the sectional allows for the chaise lounge to be positioned on either side of the sofa, offering adaptability to different room layouts.

Important Technical Specifications:

The assembly requires specific hardware and tools, including:

Legs: 6x for the sofa, 2x for the ottoman base (total 8 legs). These are universal and attach with 4 fasteners per leg.
Screws:
- 24x Socket Head Cap Screws (for legs)
- 40x Button Head Hex Screws (5 MM HEX BIT)
- 4x Button Head Hex Screws (4 MM HEX BIT)
- 16x Button Head Socket Cap Screws (5 MM HEX BIT) (for inner support braces)
- 12x 5MM Button Head Screws (for front plate)
Brackets:
- 4x Corner Brackets (for connecting arms and front plate)
- 2x Inner Support Braces
- 1x Connection Bracket (for joining sofa and ottoman base)
Plates:
- 1x Back Plate
- 1x Front Plate
Slats: 27x for the sofa, 8x for the ottoman base (total 35 slats). These arch upward when placed.
Cushions:
- A Back Pillows
- D Chaise Lounge Cushion
- E Seat Cushions
Other Components:
- 2x Arms
- 4x Washers
- 16x Neoprene Sticky Pads (for preventing cushion sliding)
Tools:
- Drill + Extension
- 5MM Hex Bit
- 4MM Ball Head Bit
- USB Charger (for the drill)

Usage Features:

Modular Design: The sofa sectional is designed to be highly adaptable. The chaise lounge cushion can be placed on either side of the sofa, and this configuration can be changed at any time after assembly.
Comfort: The design includes back pillows, seat cushions, and a chaise lounge cushion for a comfortable seating experience.
Stability: Inner support braces, a back plate, a front plate, and multiple slats contribute to the structural integrity and stability of the sofa.
Anti-Slip Cushions: Neoprene sticky pads are applied to specific slats to prevent cushions from sliding, ensuring they stay in place during use.
Easy Assembly: The instructions are broken down into clear, step-by-step processes with accompanying diagrams, making assembly manageable. Hand-tightening is often recommended initially, followed by drill tightening for secure connections.

Maintenance Features:

The document provides comprehensive fabric care instructions based on cleaning codes:

SOLVENT OR WATER CLEANABLE (S/W): Spot clean with upholstery shampoo, foam from a mild detergent, or a mild dry cleaning solvent.
WATER CLEANABLE (W): Spot clean fabric with a water-based shampoo or foam upholstery cleaner. Avoid over-wetting the stain.
SPOT CLEAN ONLY (SC): Cleaning depends on the nature of the stain. For oil-based spots, do not apply water and use a dry cloth. Leather-specific solvents and cleaners are recommended.
SOLVENT CLEANABLE (S): Must be cleaned with solvents (dry clean only). Spot treat stains with a water-free solvent or dry-cleaning product.
Machine Washable Fabrics: If a fabric is machine washable (as noted on the Free Swatch page), it should be machine washed in cold water with a mild detergent on a low/gentle cycle. All covers should be hung to dry. It's noted that machine washing adds wear, so spot cleaning is recommended first whenever possible.
General Spot Cleaning: Recommended methods include using upholstery shampoo, foam from a mild detergent, or a mild cleaning solvent. Always hang to dry.
Spill Management: Blot spills immediately to remove spilled material.
Stain Removal Technique: Clean spots or stains from the outside to the middle of the affected area to prevent circling.
Overall Soiling Prevention: Frequent vacuuming is recommended to remove dust and grime.

Inside Weather SOFA SECTIONAL - Page 13

Related product manuals