Align the arm and back panels
so that the wooden frames
meet at a right angle. Lean
the arm slightly away from the
back panel. Lift the top of the
back panel and gently lower
the hook until it connects.
Repeat on both sides.
Step 1: Connect the Arms
Connect the Hooks
Stand the arm on its side.
Identify the corresponding hooks
located on the arm and back panel.
This is how they connect.
The connection is the same
for both sides
Let’s start by connecting the arms to the back panel. Lay the back panel flat
on the floor, workbench or other stable surface with the metal strip is facing up.
The process is identical for both arms.
To Next Page
Loading...
