AUDIO/VIDEO OUT
SOUNDBAR
OPTICAL
AUDIO IN
DMI
PTI
NS
STANDS
1 Align the TV stand screw holes
with the holes on your
TV's bottom.
2 Use a Phillips screwdriver and
two provided screws to secure
each stand to your TV.
WALL MOUNT
Before you mount your TV, make sure that:
• You remove the stands.
• The wall-mount bracket supports the weight of your TV.
See the instructions that came with your wall mount
for more information about how to correctly mount your TV.
WARNING: Your TV has four VESA mounting holes on the back.
You must secure a wall-mount bracket to all four holes.
If you do not use all four holes, your TV may fall and cause
property damage or personal injury.
Note: Wall-mount screws are not included.
HDMI (best video quality)
Note: You can use the
HDMI 1 (ARC) jack to
connect a digital
audio system.
AV (good video quality)
AUDIO
OUT
DIGITAL
OPTICAL
OUTPUT
You can use the DIGITAL OPTICAL
OUTPUT
jack or the HDMI 1 (ARC)
jack.
Note: If you need to change the
digital audio format, go to the Home
menu, select Settings, then select
Display & Sounds. Select Audio Output,
then select Digital Audio Format and
change the setting to PCM or Dolby
Digital.
Note: You can use a wired Ethernet connection to
access the internet instead of a WiFi connection.
Plug an Ethernet cable into the ETHERNET jack on
your TV and your Ethernet connection.
A
DI
PTI
N
1
SOUNDBAR
AUDIO IN
L
R
ANALOG
INSTALLING THE STANDS OR A WALL MOUNT
Place your TV face-down on a cushioned, clean surface.
Note: Images do not necessarily represent the exact design
of your television.
DIGITAL
2
STOP
Before using your new product, please
read these instructions to prevent any
damage.
Do not plug your power cord in until all
other devices have been connected.
Coaxial (good video quality)
ETHERNET (optional)
Connect an antenna to
access live over-the-air TV.
HDHD
MAKING CONNECTIONS
ANT/CABLE
ETHERNET
HDMI3
HDMI2
HDMI1
(ARC)
ETHERNET
AV IN
VIDEO
AUDIO
LR
QUICK SETUP GUIDE
50"/55"
LED TV
4K ULTRA HD
NS50F301NA22
NS55F301NA22
INCLUDED ACCESSORIES
Voice Remote with Alexa
and two AAA batteries
AA
A
+
AA
A
+
Power cord
M4 × 20 mm screws
M4 x 20 mm screws
M4 × 20 mm screws
50" 55"
50" TV shown
50" TV shown
VESA Mounting Pattern
200 x 200 mm
Screws: type M6, 12 mm to
15 mm length depending
on the wall mount
VESA Mounting Pattern
200 x 200 mm
Screws: type M6, 12 mm to
14 mm length depending
on the wall mount
50"
55"
FEATURES
USB
HDMI3
HDMI2
HDMI1
(ARC)
AUDIO OUT
A
V IN
VIDEO
AUDIO
LR
ANT/CABLEETHERNET
DIGIT
AL OPTICAL
OUTPUT
50” TV shown
Power indicator
Remote control sensor
Power/
Input button
Press to turn your TV on or o
manually.
When your TV is on, a short press
changes inputs and a long press
turns o your TV.
50"
55"
M4 screws
(20 mm length) (4pcs.)
TV stands
To Next Page
Need help?
General