This section explains how to select the input source (i.e., The
AV component that you want to listen to or watch).
This unit has one set exterior decode 6 channel input, six way
analog inputs, three way digital (one is optical, two are coaxial)
inputs.All these sound sources can be selected on the panel or
remote control.
Operating Your Receiver
If you connect a DVD player to the DVD input (audio + video)
jacks and then press the DVD button, you will be able to have
the sound and image from the DVD player.
Based on the example 1,the DVD is playing, if a video source
(Audio,Video) is connected to VIDEO input jacks of this unit,
the VIDEO button is pressed, the image and sound from the
VIDEOsource will replace the DVD.
The following table lists all theinput sources and shows which
sources are the same group:
If you have two or more video devices in your system, please
use Audio/Video signal synchro switch function.
Connect each Video/Audio source's group to this unit's same
group's input jacks.
Front Panel
Front Panel
Remote Control
Front Panel
Remote Control
Selecting the Input Source
2.Press direct corresponding source button on the remote to
select a source.
On the remote control, CD and COAX 1,AUX and COAX 2,
DVD and OPTICAL are all double function buttons. If you want
to select a digital source by remote control. please press corre-
sponding button.
Remote Control
Example1:
1.Press INPUT buttons on the panel repeatedly to select an
input source.This unit is with
Every time you press the source button, the input setting (e.g.
DVD/OPTI) will be shown on display.
CD,COAX1,AUX,COAX2,TUNER,
DVD,OPTICAL,VCR,TV,VIDEO,6 CH IN sources.
Switch Synchro Audio/Video Sources
ÒôÔ´
ĬÈÏÊäÈ루ÈçÏÔʾƵËù¼û£©
ANALOG AUDIO
INPUT JACK
CD
AUX
TUNER
DVD
VIDEO
TV
VCR
6 CH IN
VIDEO
INPUT JACK
S-VIDEO
INPUT JACK
DIGITAL
INPUT JACK
/
/
/
OPT
COAX1
COAX2
/
/
/
/
/
DVD
VIDEO
TV
VCR
DVD
/
/
/
DVD
VIDEO
TV
VCR
DVD
Example 2:
3.DVD analog signal (DVD RCA) input, Optical (DVD digital
signal),DVD Video and DVD S -Video, they belong to the same
that input signal group.
analog signal ( RCA) input,COAX1 (
digital signal), Video and S -Video belong to the
same that input signal group.
TV analog signal (TV RCA) input, COAX2 (TV digital signal),TV
Video, TV S -Video belong to the same that input signal group.
VIDEO VIDEO VIDEO
VIDEO VIDEO
25
To Next Page
Loading...