Insignia NS-A1000 - Connecting low-level (RCA) inputs; Connecting the speakers

9
Insignia NS-A1000 Car Stereo Amplifier
www.insignia-products.com
Connecting low-level (RCA) inputs
Connecting the speakers
Note
Do not connect low-level input RCA jacks if you are using
the high-level input wires.
Caution
This amplifier was designed to be used with either 2 ohm
stereo/channel or 4 ohm each mono bridged channel. In the
case of tri-mode operation, use either 8 ohm stereo channel
speakers and 4 ohm sub or vice versa.
LINE INPUT
RCH
LCH
HI INPUT
LEVEL
MIN M AX
BASS
BOOST
HPF LPF
X-OVER
0dB 18dB 40 Hz 250 Hz
40 Hz 5 02zH
LINE OUT PUT
RCH
HPF LPF
FU LL
POWER
(GREEN)
P R OT ECT
(RED)
REMOTE
CON TROL
LCH
Chassis ground - black
Left channel (-)
Right channel (-)
Right channel (+)
Left channel (+)
Left channel (black)
Right channel (black)