Do you have a question about the Insignia NS-ANT500HA and is the answer not in the manual?
Reception Range | Up to 50 miles |
---|---|
Amplifier Gain | 15 dB |
Cable Length | 10 feet |
Connector Type | Coaxial |
Power Supply | USB |
Compatibility | HDTV |
Select an indoor location for the antenna, avoiding outdoor placement.
Attach double-sided tape to corners and press firmly to the wall. Confirm location before final securing.
Connect the antenna's coaxial cable to the TV's coaxial jack for HDTVs with ATSC tuners.
Connect antenna to a digital converter or set-top box, then use a video/audio cable to the TV.
Plug the power adapter into a wall outlet and the other end into the power inserter.
Turn on TV and converter box, select input, then scan for channels via TV setup menu.
Verify correct TV input, secure connections, and try rescanning after moving the antenna.
Reposition antenna, scan channels, avoid interference, and check signal strength.
Visit www.antennaweb.org with your zip code to find available digital TV reception.
Adjust antenna position, rescan, and ensure adequate signal strength.
Use a coaxial splitter for strong signals or purchase an antenna for each TV.
Antenna receives local broadcast channels; it does not support cable or streaming services.
Antenna delivers digital signals; an HDTV is required to view HD content.