Insignia NS-CAHBTEB01-B User Manual

Before using your new product, please read these instructions to prevent any damage.
CHARGING YOUR HEADSET
A tone sounds (every 60 seconds) and the LED
flashes red when your headset battery is low.
• Set power switch to OFF before charging.
• Connect the USB charging cable from your
headset’s charging port to a USB port.
PAIRING YOUR HEADSET
Pairing your first Bluetooth device
1 Slide the power switch to ON. The LED blinks red
and blue and the headset enters pairing mode.
2 Make sure that your Bluetooth device is within
33 ft. (10 m) of your headset.
3 Turn on your Bluetooth device, turn on Bluetooth,
then set your device to pairing mode. For more
information, see the documentation that came
with your Bluetooth device.
4 On your Bluetooth device, select
NS-CAHBTEB01. The LED lights blue and a tone
sounds when your headset pairs to your
Bluetooth device.
Manually pairing your Bluetooth device
1 Press and hold  (call) to enter pairing mode. The
LED blinks red and blue.
2 Make sure that your Bluetooth device is within
33 ft. (10 m) of your headset.
3 Turn on your Bluetooth device, turn on Bluetooth,
then set your device to pairing mode. For more
information, see the documentation that came
with your Bluetooth device.
4 On your Bluetooth device, select
NS-CAHBTEB01. The LED lights blue and a tone
sounds when your headset pairs to your
Bluetooth device.
Pairing two devices
1 Pair your headset to your secondary Bluetooth
device first. See "Pairing your first Bluetooth
device" for instructions.
2 Press and hold  (call) on your Bluetooth headset
to enter pairing mode.
3 Connect your primary Bluetooth device to your
Bluetooth headset. See "Manually pairing your
Bluetooth device" for instructions.
4 Re-pair your secondary Bluetooth device to your
Bluetooth headset. See "Manually pairing your
Bluetooth device" for instructions.
Note: When connected to two phones, the
headset calling functions will work with the
primary phone.
Disconnecting and reconnecting your paired
device
Your headset remembers up to six Bluetooth devices
and will turn off after three minutes if it is not paired
to a Bluetooth device.
O
F
F/
O
N
OFF/ON
Earbud (L)
Earbud (R)
Call button/LED indicator
Volume down
Volume up
Charging port
O
F
F/ON
Power switch
Neck strap
Play/Pause
Rewind/Skip back
Fast forward/Skip forward
O
Microphone
TO DISCONNECT...
Turn off your headset
TO RECONNECT...
Turn on your headset. Your headset
searches for the last connected
Bluetooth device and reconnects.
QUICK SETUP GUIDE
Bluetooth Headset
NS-CAHBTEB01 / NSCAHBTEB01-B / NSCAHBTEB01-C / NS-CAHBTEB01-B-C
PACKAGE CONTENTS
• Bluetooth Headset
• USB charging cable
• Earbuds (small and large)
• Quick Setup Guide
FEATURES
• High-quality stereo sound from Bluetooth 4.0 enabled
devices
• Battery lasts 12 hours (talk), 10 hours (music)
• Inline controls easily adjust audio
• Curved design fits comfortably around the neck

Insignia NS-CAHBTEB01-B Specifications

General

Brand	Insignia
Model	NS-CAHBTEB01-B
Category	Headsets
Type	Over-Ear
Wireless	Yes
Standby Time	Up to 200 hours
Driver Size	40 mm
Frequency Response	20Hz - 20kHz
Impedance	32 Ohms
Sensitivity	105 dB
Microphone	Built-in
Noise Cancellation	No
Foldable Design	Yes
Color	Black

Summary

Charging Your Headset

Charging Process

Connect the USB charging cable from your headset to a USB port to charge when the battery is low.

Pairing Your Headset

Pairing First Device

Slide power switch to ON; LED blinks red/blue. Select headset on your device within 33 ft.

Manual Pairing

Press and hold call button to enter pairing mode. Select headset on your device within 33 ft.

Pairing Two Devices

Pair secondary first, then primary. Press and hold call to re-pair secondary device.

Disconnecting and Reconnecting

Headset remembers up to six devices. Turns off after three minutes if not paired.

Using Your Headset

Making Phone Calls

Use phone controls to make calls. Redial last number by pressing call twice.

Call Waiting

Press call twice to switch to incoming call or between two active calls.

Playback Controls

Use headset buttons to play/pause, skip tracks, fast forward, and rewind audio.

Troubleshooting

No Sound or Low Volume

Check device power, volume, mute status, and ensure headset is paired.

Cannot Connect with Bluetooth

Shorten distance, turn devices off/on, re-pair, and check Bluetooth protocols.

Bluetooth Device Unpairing

Ensure headset and device are not paired to other devices and check distance.

Device Not Appearing

Ensure headset is charged and ON. Put headset into pairing mode and refresh device list.

No Power

Ensure the Bluetooth headset is charged and turned ON.