EasyManuals Logo
Home>Insignia>Dash Cameras>NS-CT1DC8

Insignia NS-CT1DC8 Quick Setup Guide

Insignia NS-CT1DC8
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PACKAGE CONTENTS
Dash camera USB cable
• Car Adapter Quick Setup Guide
• Suction mount
FEATURES
1080p Full HD recording
• 2.7" LCD display
• Built-in G-sensor
130 degree wide angle lens
• Built-in microphone
• Memory card slot
• Micro USB interface
Before using your new product, please read these instructions to prevent any damage.
Flat size (W×H): 323.85 × 152.4 mm
Final folded size: 107.95 × 152.4 mm
QUICK SETUP GUIDE
Dash Camera
NS-CT1DC8
Back Side
Front Top
Bottom
INSTALLING YOUR DASH CAMERA
1 Attach the dash camera to the suction
mount (provided).
2 Install the suction mount onto your
cars front windshield, then adjust the
dash camera to the proper angle for
recording.
3 Plug the provided USB cable's micro
SD connector into the dash camera.
4 Plug the other end of the USB cable
into the car adapter (provided).
5 Plug the car adapter into a 12V car socket.
FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, enter NS-CT1DC8 in the
search box, then press ENTER. Next to Features, click Support
& Downloads, then next to User Guide, select the language
you want.
# ITEM
1 Indicator LED
2 Camera button
3 Menu button
4 Save Event
5 Up/WDR/OSD
button
6 Turn on/o
recording OK button
7 Turn on/o
recording/Down
button
8 MicroSD card slot
9 Speaker
10 Reset button
11 Suction cup mount
12 Mini USB jack
13 Power button
14 Vents
15 Microphone
DESCRIPTION
Blue solid - Power on
Red blinking - Video recording
In camera mode, press to take pictures.
In video playback mode, press to delete the current le.
In loop recording mode, press to take pictures.
Press to switch between the system settings screen, function settings
screen, and the video interface.
In replay mode, press to return to the previous page.
During recording, press to lock current clip in card and prevent from being
erased. When not recording, press to enter playback le interface.
In loop recording mode, press to turn o the display.
In stop mode, press to turn WDR (Wide Dynamic Recording) on or o.
In OSD mode, press to go to the previous page.
While recording, press to stop recording.
In stop mode, press to begin recording.
In OSD mode, press to cycle through onscreen display modes.
Press to turn the sound recording on or o.
In OSD mode, press to go to the next page.
Insert MicroSD card (8 to 32GB) in this slot to store video les. Card is
required for recording and playback.
Plays sound from the device.
Press to reset your dash camera.
Attach the suction cup to this mount.
Connect a USB cable to this jack to power the dash camera or to download
les to a computer.
Press to turn on the dash camera.
Press and hold for two seconds to turn o the dash camera.
Provide airow for the dash camera.
Captures audio when enabled.
NS-CT1DC8_17-0514_QSG_V1_EN.ai 1 7/28/2017 9:01:47 AMNS-CT1DC8_17-0514_QSG_V1_EN.ai 1 7/28/2017 9:01:47 AM

Other manuals for Insignia NS-CT1DC8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Insignia NS-CT1DC8 and is the answer not in the manual?

Insignia NS-CT1DC8 Specifications

General IconGeneral
BrandInsignia
ModelNS-CT1DC8
CategoryDash Cameras
LanguageEnglish

Related product manuals