4
Installing the battery
1 Slide the lock to the unlocked
position, then open the battery/SD/
SDHC card compartment on the
bottom of your camera.
2 Insert the battery matching the
+ and - symbols on the battery
with the + and
- symbols in the
compartment.
3 Close the compartment cover,
then slide the lock into the
locked position.
Inserting a memory card
1 Slide the lock to the unlocked
position, then open the battery/
SD/SDHC card compartment on
the bottom of your camera.
2 Insert an SD or SDHC card into
the card slot with the card’s
metal contacts facing the front
of the camera.
3 Close the compartment cover, then slide the lock into the
locked position.
Note: To remove the card, gently press on the edge of the card and release it.
Pull the card out, then close and lock the battery cover.
LOC
K
2
1
1
To Next Page
Loading...
Need help?
General
