5
Initial settings
When you turn on your camera for the rst time, you need to choose a
menu language and set the date and time.
1 Turn on your camera. The Select Language
screen opens.
2 Press or to select a language, then press
OK/DISP. The Select Time and Date screen opens.
3 Press or set the hour, then press to move
to the minute eld.
4 Repeat Step 3 to select the minutes, AM or PM,
and to enter the month, day, and year.
Taking photos
1 Turn on your camera.
2 Slide the MODE to switch to Photo
mode. The photo mode
icon
appears in the upper-left of the LCD.
3 Frame the image using the focus
bracket on the LCD.
4 Press the shutter button down
halfway. When your camera is ready
to take the photo, the focus bracket
turns green, and the aperture value,
shutter, speed, and ISO setting are
displayed. If the shake warning
icon appears on the LCD, hold the
camera steady, with your arms at
your sides, or use a tripod to stabilize
the camera in order to prevent
blurred images.
5 Fully press the shutter button to
capture the image.
Note: Be sure not to block the lens with your ngers or the wrist strap.
To Next Page
Loading...
Need help?
General
