EasyManua.ls Logo

Insignia NS-DSC7B09 - Installing batteries; Inserting the memory card; Turning the power on and off

Insignia NS-DSC7B09
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Installing batteries
1 Open the battery cover by sliding
it in the direction indicated by the
arrow.
2 Insert two AA batteries with
the positive (+) and negative (-)
terminals matching matching the
directions indicated inside the
battery compartment.
3 Close the battery cover.
Inserting the memory card
1 Open the battery cover.
2 Insert the card with the label facing
up and with the arrow pointing in.
3 Close the battery cover.
Note: To remove the card, gently press on the edge of
the card and release it. Pull the card out and close the
battery cover.
Turning the power on and o
1 Press POWER
to turn the camera
on in REC mode.
- OR -
Press PLAYBACK
to turn the
camera on in PLAYBACK mode.
2 Press POWER
again to turn the
camera o .

Related product manuals