Insignia NS-HFTVS3N175 - Adjust Wall-Mount Tilt

www.insigniaproducts.com
32
STEP 6: Adjust the tilt
You need:
The TV brackets (J) let you make a tilt adjustment of up to 11° down and 5° up to provide optimum viewing and minimize
glare.
1 Loosen the tension knobs on both TV brackets (J), then grasp the edge of the TV and move it up or down to the
position you want.
2 Turn the tension knob clockwise to secure the brackets in position. Use the 4.8 mm hex wrench (X) to tighten the
tension knobs, if necessary.
X 4.8 mm Hex key (1)
Turn clockwise to tighten.
Turn counterclockwise to loosen.
5° ~ 11°