PACKAGE CONTENTS
ASSEMBLING YOUR CHAIR
1 Turn the star base (B) upside down on carpet or a soft towel.
2 Insert the wheel (A) posts into the holes at the ends of the star base arms until they click into place.
3 Turn the base right side up, then insert the bottom of the center support post (C) into the hole in the center
of the star base (B). Put the center post cover (D) on the center support post (C).
4 Turn the seat bottom (F) upside down and place it on a padded box or small stool to support it.
5 Align the riser mechanism (E) on the bottom of the seat (F) and attach it to the seat with four
5/16" × 3/4"
screws (K). Tighten the screws with the Allen wrench (J).
6 Lift the seat bottom (F) and turn it right side up, then align the hole in the riser mechanism (E) with the
center support post (C) and press the seat down until it clicks into place.
7 Attach the left arm (H) and right arm (G) to the seat bottom (F) by using four 1/4" × 1" screws (L) and
tighten the screws fully using the Allen wrench (J).
FEATURES
• Seat height adjusts to t your body
• Swivel and tilt mechanism lets you customize the chair to your preferred position
• Sturdy, 5-pointed star base with wheels makes it easy to move around
• Black design with white trim grants a modern, sleek look
• Made with quality materials for dependable stability
QUICK SETUP GUIDE
Essential PC
Gaming Chair
NS-PCGV30
Before using your new product, please read these instructions to prevent any damage.
Quick Setup
Guide
Allen
wrench
Wheels (5) Star base Center
support post
Seat bottom
5/16" × 3/4"
screw (4)
Center
post cover
Riser mechanism
Right arm Left arm
Seat back
1/4" × 1"
screw (8)
Arm caps (8)
FRONT
FRONT
Spare parts:
5/16" × 3/4" screw
1/4" × 1" screw
Arm cap
To Next Page
Need help?
General
