www.insigniaproducts.com
36
STEP 4: Position your TV stand and install the tipping restraint hardware kit
You need:
1 Position your assembled stand against a wall where you plan to use it.
2 Adjust the leveling feet to level your TV stand.
3 Follow the instructions printed on the bag containing the tipping restraint hardware kit (Z) to attach the restraint
hardware to the wall and your stand.
WARNING: The tipping restraint must be installed correctly. Failure to do this could result in your TV/stand assembly falling
forward, resulting in damage to equipment or personal injury.
Edge-to-edge stud finder
Level
Pencil
1/8" drill bit
Power drill
Z Tipping restraint
hardware kit (1)
Wooden studs
Wall
Pre-attached
bolt
Wall
Long screw
Leveling foot
Nylon strap
To Next Page
Loading...
