EasyManua.ls Logo

Insignia NS-IC1ZBK8 - Additional Safety Concerns

Insignia NS-IC1ZBK8
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
NS-IC1ZBK8
www.insigniaproducts.com
19 Be careful when you clean the cooktop – If a wet sponge or cloth is
used to wipe spills on a hot cooking surface, be careful to avoid steam
burn. Also, some cleaners can produce noxious fumes if applied to a
hot surface.
20 Do not place metallic objects, such as knives, forks, spoons, and lids,
on the cooktop, because they can get hot.
SAVE THESE INSTRUCTIONS
WARNING
Electric Shock Hazard
Failure to follow these instructions can result in electric shock, fire, or
death.
Additional safety concerns
1 Never heat foods in sealed containers, such as compressed products,
cans, or coffee pots, to avoid explosion caused by heat expansion.
2 Do not directly rinse this cooktop under water. Do not spill water or
soup into the internal parts of the cooktop.
3 To avoid affecting product performance and to prevent injury, do not
heat empty pots. When in use, do not leave the appliance without
supervision for a long time. When leaving the appliance without
supervision, make sure there is enough water in the pot.
4 To avoid accidents, do not use the cooktop on a gas stove (the
magnetic lines can heat the metal parts of the gas stove).
5 Do not heat iron items, other than iron cookware, on the cooktop to
avoid danger caused by high temperatures.
6 To avoid injuries such as scalding, do not let children operate the
appliance alone. Children should be supervised to ensure that they do
not play with the appliance.
7 To avoid danger, do not block or insert any foreign object into the air
ventilation opening or air entry port.
8 To avoid danger, do not place paper, aluminium foil, cloth, or other
unsuitable articles onto the cooktop heating plate for indirect heating.
9 When using the cooktop, do not put it on any metal platform (such as
iron, stainless steel, or aluminium), or place a non-metal pad less than
4.7 in. (12 cm) thick on the heating plate.
10 Unplug the power cord from the outlet after use to avoid fire and/or
damaging the electronic components, caused by prolonged electrical
connection.
NS-IC1ZBK8_17-0623_MAN_V2_ENG.fm Page 4 Thursday, August 17, 2017 8:50 AM

Related product manuals