EasyManua.ls Logo

Insignia NS-M35FMT User Manual

Insignia NS-M35FMT
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SETTING UP YOUR TRANSMITTER
1 Plug the car adapter into your vehicle’s cigarette lighter
receptacle. Your transmitter turns on.
2 Connect the 3.5 mm audio plug to your audio devices
AUX jack.
TUNING YOUR TRANSMITTER
You can tune your transmitter manually, automatically, or
with saved presets.
PACKAGE CONTENTS
• FM transmitter
Quick Setup Guide
FEATURES
3.5 mm audio cable
Auto scan quickly nds unused stations
Buttons easily control your transmitter
Quick Setup Guide
I
NS-M35FMT / NS-M35FMT2-C
3.5 mm Universal FM Transmitter
Before using your new product, please read these instructions to prevent any damage.
Manually tuning your transmitter
1 Tune your vehicles radio to a weak or unused FM
frequency. You should hear static.
2 Press and hold M, then press - or + to tune your
transmitter to the same frequency as your radio.
The frequency is shown on the screen.
Automatically tuning your transmitter
1 Press and hold 1. Your transmitter automatically selects a
weak or unused frequency.
2 Tune your radio to the same frequency as your transmitter.
Using memory presets
Press the button (1, 2, or 3) that you saved a radio
frequency to. See “SAVING MEMORY PRESETS” for more
information.
3.5 mm audio
plug
Screen
Car adapter
Frequency
tuner
Memory presets
Manual frequency mode
Adjust frequency/
Auto scan mode
1 2 3
- + M
Question and Answer IconNeed help?

Do you have a question about the Insignia NS-M35FMT and is the answer not in the manual?

Insignia NS-M35FMT Specifications

General IconGeneral
Model NumberNS-M35FMT
TypeFM Transmitter
Frequency Range88.1 MHz - 107.9 MHz
Power Source12V DC car adapter
DisplayLED

Summary

Setting Up Your Transmitter

Tuning Your Transmitter

Manually Tuning Your Transmitter

Tune your vehicle's radio to an unused FM frequency, then press and hold M, then use -/+ to tune the transmitter to match.

Automatically Tuning Your Transmitter

Press and hold 1 to automatically select a weak frequency, then tune your radio to match the transmitter.

Using Memory Presets

Press a saved memory button (1, 2, or 3) to recall a previously stored radio frequency.

Saving Memory Presets

Using Your Transmitter

Troubleshooting

Audio Has Static

Ensure radio and transmitter are tuned to the same frequency. Try using a different FM radio frequency.

No or Low Audio

Check cable connections, frequency tuning, and audio device volume. Try a different FM radio frequency.

Specifications

Legal Notices

One-Year Limited Warranty