Insignia NS-MB10400 User Manual

PACKAGE CONTENTS
• Mobile battery pack
• Micro USB Charging/Sync cable
• Quick Setup Guide
SAFETY INFORMATION/CAUTION
• Do not expose your mobile battery pack to heat, fire, or water.
• Do not modify, disassemble, open, drop, crush, puncture, or
shred the internal battery.
• This is not a toy. Young children should be supervised to
make sure that they do not play with the mobile battery.
• Do not charge electronic devices while the battery pack is
recharging.
• Recharge the mobile battery before use if it has not been
used for more than 90 days.
• Risk of res and burns. Do not open, crush, heat above
140°F (60°C), or incinerate. Follow the manufacturer’s
instructions.
• Operation environment temperature: 32~104°F (0~40°C).
This product is safe for regular use under normal conditions.
As with any device using electrical power, some situations
may be unsafe and injuries or damages could result. To
minimize or avoid unsafe conditions, read and follow the
instructions before using.
FEATURES
CHARGING YOUR MOBILE BATTERY
Note: Fully charge your mobile battery before using it for the rst
time.
1 Plug the small end of the included USB cable into the
battery pack’s micro USB port (input).
Before using your new product, please read these instructions to prevent any damage.
Quick Setup Guide
|
NS-MB10400 / NS-MB15600 / NS-MB20800 /NS-MB10400-C / NS-MB15600-C / NS-MB20800-C
Mobile Battery Pack
2 Plug the large end of the USB cable (included) into a
standard USB port on your computer, vehicle
charger, or wall charger (not included).
The LEDs light indicating the battery level, and the
battery pack begins charging.
Note: The battery pack is fully charged when all four LEDs light.
CHARGING YOUR ELECTRONIC DEVICE
1 Plug the large end of the USB cable into one of the
battery pack’s USB output ports.
2 Plug the small end of the USB cable into your device.
The battery pack automatically begins charging
your device. Recharge the battery pack when the
LED starts blinking.
Notes:
• If your device requires a dierent connector than the one
provided, use the cable that came with your device.
• If you connect more than one USB device, 4.2A power is
shared between the ports. If your device does not charge
fast enough, disconnect the other USB device(s).
NS-MB10400
NS-MB15600
NS-MB20800
Battery indicator button
LEDs
Input
Output 4.2A total
OR
Input
Output 4.2A total
Input
Output 4.2A total
Micro USB
input
USB output
OR

Insignia NS-MB10400 Specifications

General

Brand	Insignia
Model	NS-MB10400
Category	Battery Pack
Language	English

Summary

Package Contents and Safety Information

Package Contents

Lists the items included in the package: mobile battery pack, micro USB cable, and quick setup guide.

Safety Information and Cautions

Provides critical warnings regarding heat, water, disassembly, child supervision, and charging practices.

Product Features and Charging

Product Features Overview

Highlights the product's LEDs, micro USB input, USB output, and battery indicator button.

Charging the Mobile Battery

Step-by-step guide to charging the battery pack using a USB cable and power source.

Charging an Electronic Device

Instructions for connecting and charging your electronic device from the battery pack's USB ports.

Battery Status and Specifications

Checking Battery Level

Explains how to check the battery pack's remaining power using the indicator LEDs and button.

Technical Specifications

Details input, output, and capacity specifications for different Insignia mobile battery models.

Legal Notices and Support

FCC and ICES Statements

Compliance statements for FCC and ICES regulations regarding digital device interference.

Warranty and Contact Information

Information on the one-year limited warranty, customer service contact numbers, and website.