What to do if my Insignia NS-SB20BK6 stopped working in the middle of blending something?
If your Insignia Blender stops working mid-blend, it's likely that the motor overheated and the thermal fuse activated. To fix this, unplug the blender base and wait 15 minutes. This should reset the fuse, allowing you to blend again.
Why is my Insignia NS-SB20BK6 leaking?
There are several reasons why your Insignia Blender might be leaking. Check if the grey sealing ring is correctly placed in the blade assembly. Ensure the blade assembly is tightly attached. Inspect the jar and blade assembly for any cracks. Also, check the grey sealing ring for damage (cracks, breaks, or rotting). Finally, make sure you aren't exceeding the jar's capacity.
Why won't my Insignia NS-SB20BK6 turn on?
If your Insignia Blender won't turn on, make sure that it is plugged into a working outlet. Also, check that the jar is correctly positioned on the blender base and that the blade assembly is tightened all the way.
Why does my Insignia Blender turn on, but the blade doesn't rotate?
If your Insignia Blender turns on but the blade doesn't rotate, ensure that the jar is seated properly on the blender base.
Why does my Insignia NS-SB20BK6 Blender jar still smell bad after being cleaned?
If your Insignia Blender jar smells bad even after cleaning, it might be due to the ingredients you're blending. Try storing the blender without the lid or blade assembly attached to the open end after cleaning to allow it to air out.
Lists the items included in the blender package.
Highlights the key components and design elements of the blender.
Guides the initial setup and cleaning before first use.
Explains the step-by-step process for everyday blender operation.
Specifies the duration of the product warranty period.
Details the types of defects and issues covered by the warranty.
Explains the process for requesting warranty repairs or replacements.
Defines the geographical regions where the warranty is applicable.
Lists exclusions and situations not covered by the warranty.
To Next Page
General