INSTALLATION INSTRUCTIONS
18
www.insigniaproducts.com
If you install your washer in an alcove or closet, the front of the closet must have
two unobstructed air openings for a combined minimum total area of 72 sq. in.
(465 sq. cm) with a minimum clearance of 3 in. (7.6 mm) at the top and bottom. A
slatted door with equivalent space clearance is acceptable.
Installing in an alcove or closet
Minimum clearances between your washer and adjacent walls or other surfaces
are:
• Either side: 1 in. (2.5 cm)
• Rear: 6 in. (15.2 cm)
• Closet Front: 2 in. (5.1 cm)
• Top: 24 in. (61 cm)
48 sq. in. (310 cm²)
24 sq. in. (155 cm²)
3 in. (7.6 cm)
3 in. (7.6 cm)
To Next Page
Loading...
