EasyManua.ls Logo

Insignia NS-TWM45W1 - Page 42

Insignia NS-TWM45W1
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
www.insigniaproducts.com
Water leaks Make sure that all hose connections are tight. See Step 2:
Connect the water hoses on page 21
and Step 3: Connect the drain hose on page 25.
Make sure that the end of the drain hose is correctly inserted
and secured to the drainage system. See Step 3: Connect the
drain hose on page 25.
Avoid overloading.
Use a high-efficiency detergent to reduce over-sudsing. See
Step 1: Selecting a detergent on page 32.
Load has too
many suds
Use a high-efficiency detergent to reduce over-sudsing. See
Step 1: Selecting a detergent
on page 32.
If you have “soft” water, reduce the amount of detergent.
For small or lightly soiled loads, reduce the amount of
detergent.
Washer has an
odor
Periodically run a Tub Clean cycle to clean the tub. See
Cleaning the tub
on page 39.
Use a high-efficiency detergent to reduce over-sudsing.
Excessive suds collect in nooks and crannies and cause odor.
See Step 1: Selecting a detergent
on page 32.
Dry the interior of your washer after the total cycle has
finished.
PROBLEM SOLUTION

Related product manuals