Insignia Premium Series - Right Column and Side Panel Installation; Install Right Column and Side Panel

www.insigniarange.com Last Modied: 20/08/2020
10
Step 3 — Installing the Right Column and Right Side Panel
SW9 x 6
NB20 x 6
DB 9
DO NOT SCREW PANELS TO THE TRAY.
PRESS PANELS
DOWN FIRMLY
ON TO THE
RUBBERGUM.
Rear View
If the RubberGum raises
the column or panel and
mis-aligns the pre-drilled
holes for connecon,
use a drill and Drillbit to
make new ones.
Rear View
The steam generator slides from
side to side in order for you to
access the nuts and bolts when
ng the panel and column. Slide
the steam generator away from
the side panel during this step
and use some long nosed pliers to
get the nuts in posion.
Please Note: The columns are interchangeable and can be installed in either posion. For
these build instrucons we’ve installed the control panel column on the right.