www.insigniarange.com Last Modied: 20/08/2020
33
Step 24—Steam Generator Connections Continued (steam version only)
A
1
2
B
C
3
AMI01 x2
3. Steam Drain: A — Connect the white plasc threaded connector (Image 1)
B— Connect the drain hose from the waste underneath the tray (Image 1)
Trim the drain hose from the generator to your desired length and connect the hose to (A) (Image 1) and secure
in place with a jubilee clip from the screw pack contents (Image 2).
Connect a hose from your accessory box from the spigot (C), to (B) and ghten using the jubilee clip provided.
Note: For steam version, ensure you have drilled out the spigot from Step 1.
To Next Page
Loading...