InSinkErator Hot250 - User Manual

Système de distributeur d’eau chaude instantanée
Installation, entretien et utilisation
Installation, Care & Use
Instant Hot Water Dispenser System
Dispensador de agua caliente instantáneo
Instalación, mantenimiento y uso
Hot250
HOT! This system can dispense near boiling water. Care and
supervision should be taken to avoid scalding.
¡CALIENTE! Este sistema puede suministrar agua casi hirviendo. Se debe
tener cuidado y usarlo bajo supervisión para evitar quemaduras.
BRÛLANT! Ce système peut distribuer de l’eau bouillante. Des précautions
doivent être prises et une supervision assurée pour éviter les brûlures.
CAUTION / PRECAUCIÓN / MISE EN GARDE
!

Summary

Before Installation and Use

System Requirements

Important Safety Information

Installation Equipment Checklist

Complete System Overview

Installation Best Practices

Quick Connection Guidelines

Instructions for proper use of quick connections to prevent leaks.

Tubing Requirements

Specifications and requirements for plastic tubing.

Mounting and Hole Specifications

Tubing Connections and Drainage

Filter Installation Procedure

Water Supply Routing and Connections

Initial Tank Filling and Temperature Setup

Instructions for filling the tank and initial temperature settings.

Safe Operation and Handling Precautions

Limited Warranty Information

Permitted Product Uses

Defines approved uses and combinations with other products.

Warranty Coverage and Exclusions

Details what defects are covered and lists warranty exclusions.

Service, Claims, and Liability Limits

Explains warranty service, claim process, and liability limitations.

Troubleshooting and System Care

Resolving Dispenser Problems

Common problems and their solutions for the dispenser.

Maintenance and Operational Guidance

Maintenance, cleaning, thermostat adjustment, and seasonal storage.

InSinkErator Hot250 Specifications

General

Model	Hot250
Product Type	Instant Hot Water Dispenser
Voltage	120V
Water Temperature	190°F
Temperature Range	Adjustable
Dimensions	8.5 x 9.5 x 9.5 inches
Dimensions (H x W x D)	14.5 x 8.5 x 8.5 inches
Water Flow Rate	0.5 GPM
Temperature Rise	100°F
Inlet Connection	3/8 inch
Safety Features	Thermal Cutoff
Warranty	3 years limited warranty