Inspire BT7002PX3 Assembly, Use, Maintenance Manual

6. Installation / Assembly / Parts Identication / Drawings
7. Maintenance / Cleaning
8. Others (Service, Repairing, Guarantee, etc …)
-Have your product repaired by a qualied person
This electric product is in accordance with the relevant safety requirements. Repairs
should only be carried out by qualied persons using original spare parts, otherwise this
may result in considerable danger to the user.

- Please contact the store which you bought the product for after sale services if any.
Disconnect from mains before maintenance or cleaning.
Repairs should only be carried out by qualied persons and using genuine spare parts.
Inappropriate repairing could cause signicant danger.
Always use bulbs according to specications listed in this manual.
Do not replace bulbs when it is raining.
WARNING: The use of any accessory not specied in this manual may present a risk of
personal injury.
Put your mains cable (H05RN-F 3G 1.0mm2, not included) into the junction box through
the plastic stud and rubber gasket. Ensure that the plastic stud is suciently tight.The earth
wire should be longer than L,N wire.
5. Appliance specications
4. Environmental protection
Electrical products must not be thrown out with domestic waste. They
must be taken to a communal collecting point for environmentally friendly
disposal in accordance with local regulations. Contact your local authorities
or stockist for advice on recycling. The packaging material is recyclable.
Dispose of the packaging in an environmentally friendly manner and make
it available for the recyclable material collection-service.
CAUTION!
Rated voltage
Rated frequency
Rated wattage
Bulb rating
Protection class
220-240V~
50/60Hz
Max 28W
GU10 Max 28W
I
IP65,IP67
Clear glass
5KN
I
Protective shields
Rated load
P number
TECHNICAL CHARACTERISTICS
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
EN
35

Inspire BT7002PX3 Specifications

General

Brand	Inspire
Model	BT7002PX3
Category	Lighting Equipment
Language	English