STEP 6 (See Diagram 6)
A.) Attach the Height Adjustment Handle (#36) to the Right Lock
Switch (#10) on the Pulley Carriage (#8) Not Shown on Diagram.
Secure it with one M5 x 3/8” Allen Bolt (#45). Repeat the same
procedure to install the other side.
B.) Connect the Single Handle (#24) to the Cable (#2) on the Right
Station (#1) with a Spring Clip (#39). Repeat the same procedure
to install the other side.
C.) Replace the Single Handle with the Ankle Strap (#26), or Sports
Handle (#21) for various Leg Exercises.
D.) Lift up the Height Adjustment Handle (#36) and slide the Pulley
Carriage (#8) along the Pulley Carriage Support Frame to the
selected level. Release the Handle to lock the Pulley Carriage in
position.
E.) Store Curl Bar (#22), Straight Bar (#23), Rope (#20) onto the
Upper and Lower Hanger Bracket (#14) & (#15).
PAGE 15 6/2011
To Next Page
Loading...
