Inspire Guillin - Maintenance; Cleaning; Repair Guide

6. Maintenance / Cleaning
Alway disconnect the appliance before cleaning or doing maintenance.
Never use a wet sponge to clean the appliance.
In order to not damage the product,it is advisable to use adapted equipment to the fragile surfaces
and products slowing the wear on the appliance.
7. Repair Guide
8.Others (Service, Repairing, Guarantee, etc.)
Have your product repaired by a qualied person.
This electric product is in accordance with the relevant safety requirements.
Repairs should only be carried out by qualied persons using original spare parts, otherwise This may
result in considerable danger to the user.
Please contact the store which you bought the product for after sale services if any question.
Please contact the store which you bought the product if you lost the installation manual.
2 years guarantee for this product based on residential usage 8 hours/day.
37
FR
ES
PT
IT
EL
PL
KZ
UA
RO
EN
TROUBLE
Fan will not
start
Fuse or circuit breaker blown.
Loose power line connections to the
fan.
Speed controller not in correct positon.
Fan sounds
noisy
Mechanical
noise
Fan wobbles
Top canopy touching ceiling.
Loose fan blades screws.
Ceiling fan not secured against ceiling.
Incorrect speed controller.
Fan blades are not horizontal to ceiling.
Blade screws are loose.
Measure from ceiling to tips of baldes,then
rotate fan so all blades are checked for equal
height from ceiling(not adjustments may be
made by slight pressure up or down on blade
holders).
Make sure all screws are securely fastened.
Allow at least for 8 hours setting-in period.
Lower canopy form ceiling to ensure minimum
3mm clearance.
Re-tighten all screws on fan blades but never
over-tighten.
Re-tighten all screws in the hanging bracket or
plate.
Change the controller to one supplied.
Check main and branch circuit fuses or circuit
breakers.
Check line wire connections to fan.
Check speed controller's position.
PROBABLE CAUSE SUGGEST REMEDY