22
5. Appliance specications
TECHNICAL CHARACTERISTICS
Rated voltage DC 12V
Max.10W
25°C
class III
IP 20
Adaptor
Rated wattage
Ambient Temperature
Protection
IP number
CLASS II INPUT:220V-240V ~50/60Hz 0.3A
6. Maintenance / Cleaning
7. Others (Service, Repairing, Guarantee, etc.)
Disconnect from mains before maintenance or cleaning.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service
agent or a similar qualified person.
WARNING: The use of any accessory not specied in this manual may present a risk of
personal injury.
Have your product repaired by a qualified person.
This electric product is in accordance with the relevant safety requirements.
Repairs should only be carried out by qualified persons using original spare parts, otherwise This may
result in considerable danger to the user.
Please contact the store which you bought the product for after sale services if any.
Warning: the product must be connected to power supply which is provided by manufacture.
The product is SELV class III lamp with approved class II LED driver.
This product contains a light source of energy efficiency class <E> - (EU) 2019/2015
FR
ES
PT
IT
EL
PL
RO
UA
EN