Inspire Loma - User Manual

Need help?

Do you have a question about the Inspire Loma and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document describes the Loma Inspire Solar Lamp, a versatile lighting solution designed for outdoor use.

Function Description

The Loma Inspire Solar Lamp is a solar-powered lighting device that can operate both day and night when its switch is turned on. It features multiple lighting modes and a motion sensor for enhanced functionality. The lamp can be activated by a long press of its button or via a remote control. It also includes a "booster" function, likely for temporary increased brightness. The device is designed for easy installation in a location exposed to sunlight.

Important Technical Specifications

Battery: 1x 3.7V 3000mAh Li-ion battery.
Remote Control Battery: CR2032.
IP Rating: IP44 (indicating protection against solid objects larger than 1mm and splashing water from any direction).
Protection Class: Class III (indicating protection against electric shock by supplying power at a safety extra-low voltage (SELV) from a SELV source).
Operating Temperature: 0°C to +45°C.
Charging Input:
- USB-C: 5V DC 2.1A
- USB-C: 5V DC 2A (likely for the power bank or a different charging mode)
Light Output Modes:
- 100LM
- 300LM
- 600LM
- 900LM
Motion Sensor Range: Up to 10m.
Dimensions (for installation): 39.4cm width.
Drill Bit Size for Installation: Ø8mm.
Screwdriver Sizes for Installation: 3mm & 6mm.

Usage Features

Installation: The lamp is designed for wall mounting. Installation requires drilling two Ø8mm holes, inserting wall plugs (E x2), and securing the lamp with screws (F x2). A spirit level and a pencil are recommended for accurate placement. It is crucial to install the solar product in a location exposed to direct sunlight for optimal performance. During winter, performance may be affected by lower temperatures and reduced solar panel exposure.

Initial Setup: Before first use, or after a long period of disuse, the power bank should be fully charged. To activate the lamp for the first time with the remote control, a long press (>3s) on the lamp's button is required. The insulating strip from the remote control battery (CR2032) must be removed before use.

Lighting Modes and Operation: The lamp offers four brightness levels: 100LM, 300LM, 600LM, and 900LM. These modes can be cycled through by pressing the lamp's button for 1 second. The lamp can function continuously (day and night) when the switch is ON. When charging during the day, the lamp should be turned OFF.

Timer Functions (via remote control): The remote control allows setting various timer durations for different brightness levels:

100LM: 15H (continuous operation) or 30H (with motion sensor)
300LM: 5H (continuous operation) or 10H (with motion sensor)
600LM: 2H30 (continuous operation) or 5H (with motion sensor)
900LM: 1H45 (continuous operation) or 3H30 (with motion sensor)

Motion Sensor Mode: The lamp features a motion sensor with a range of up to 10 meters. In motion sensor mode, the lamp will turn on to a specified brightness when motion is detected. The remote control allows activating or deactivating the motion sensor.

Booster Function: The "booster" function, indicated by a "+" symbol on the remote, likely provides a temporary increase in brightness. The remote also has an "inspire" button, which might be related to a default or standard lighting mode.

Lock/Unlock Function: The remote control has lock and unlock buttons. A long press (>7s) on the lock button puts the lamp into a sleep mode, disabling the motion sensor and continuous light. This is useful for preserving battery life during long periods of non-use.

Pairing Multiple Lamps: Multiple Loma Inspire lamps can be paired together. To pair, press the "inspire" button on the remote for 7 seconds (1st lamp), then press the "booster" button on the remote for 3 seconds (2nd lamp). This process can be repeated for additional lamps.

Battery and LED Module Replacement: The battery and the LED module within the lamp are replaceable, extending the product's lifespan.

Maintenance Features

Cleaning: The solar panel should always be kept clean to ensure optimal efficiency. Dust and dirt can reduce its performance. Use a damp cloth and a small amount of detergent for cleaning. Avoid using abrasive materials.

Battery Preservation: If the solar lamp will not be used for a prolonged period, it is recommended to switch off the device by pressing "OFF" to preserve the rechargeable battery.

Safety Precautions:

Keep batteries out of reach of children and animals. Ingestion of batteries can be fatal; seek immediate medical attention if a battery is swallowed.
Ensure correct battery polarity as indicated in the battery compartment.
Never dispose of batteries in fire or water, as they may leak or explode. Do not open, short-circuit, or damage batteries.
Only use rechargeable batteries of the recommended type. Other rechargeable or single-use batteries may explode during charging.

Environmental Protection: Electrical products and batteries should not be disposed of with household waste. They must be taken to designated communal collection points for environmentally friendly disposal and recycling, in accordance with local regulations. Packaging materials are recyclable and should be disposed of ecologically.

Warranty: The product comes with a 3-year warranty from the date of purchase, covering manufacturing defects, missing parts, and damage under normal use. The warranty does not cover issues resulting from incorrect use, installation damage, or discoloration/stains due to non-compliance with maintenance instructions.