Connect the included charge cable to the Charge Case to charge it.
Connect to a
5V 2A power
adapter
Downloading the App & Activating
Shooting
Step 1: Scan the QR code (https://www.insta360.com/
download/insta360-go2) or search "Insta360" in the
App Store or other Android app stores to download the
Insta360 app.
Refer to the "Button Instructions" card included in the box for instructions on how to
use GO 2's Action Button and Charge Case buttons. You can customize the Action
Button's basic functions to your preference in the app. For more product information,
visit:
https://www.insta360.com/support/product-support
Step 2: Turn on your mobile device's WiFi. Then long press the Action Button for 1
second to power on GO 2.
Step 3: Open the Insta360 app, tap the camera icon at the bottom of the app
homepage, swipe until you see GO 2 and tap "Connect Now". Select the device you
want to connect to and follow the onscreen instructions to complete the connection.
The name of your camera is "GO 2
" by default, where
is the last six digits of the serial number on the box your GO 2 came in. The first
time you connect to GO 2, please single press its Action Button to confirm your
connection.
Step 4: After successfully connecting the camera, follow the app prompts to activate
your camera.
The app will prompt you to update the firmware if there is a new
version available. Please follow the on-screen prompts to update the firmware
of GO 2 and the Charge Case.
Previewing via the App
After shooting, connect your GO 2 to the Insta360 app and go to the Album page to
view your clips. You can also take photos or videos via the app and preview your shot
in real-time.
* Note: As system files and cache take up some memory, the actual available storage
space will be slightly less than the total memory.
2
EN
To Next Page
Loading...
Need help?
General
Weight and Dimensions
