Insta360 GO 2 User Manual

C1. Pivot Stand: Attaching to
a Flat Surface
Slide the Pivot Stand base's
cover down to remove it, then
stick the Pivot Stand onto a
clean and flat surface.
C2. Pivot Stand: Handheld
Use (For Underwater)
Rotate the camera frame
out 180° and then hold the
Pivot Stand's base to shoot.
* Image for reference only. Accessories vary based on specific bundle.
B. Easy Clip
(Place GO 2 into the Easy Clip so it snaps into place.
Rotate the camera frame to adjust the shooting angle.
It's suggested to adjust the angle slightly downward.)

Mounting GO 2
A. Magnet Pendant
The Magnet Pendant should be
worn underneath your shirt with
the diagram facing out. Place GO 2
over your shirt so it snaps on.
• Accessories:

GO 2 and its accessories contain small objects. Keep them out of children's reach to
prevent swallowing.

Notes
3
EN

Insta360 GO 2 Specifications

General

ISO sensitivity	100, 3200, Auto
Light exposure modes	Auto
Light exposure correction	± 4EV
Weatherproof	Yes
Product color	White
Built-in light	No
Waterproof up to	4 m
Country of origin	China
Operating temperature (T-T)	-10 - 40 °C
Battery type	Built-in
Charging time	0.58 h
Battery life (max)	2.5 h
Battery technology	-
Video recording time	0.5 h
USB connector type	USB Type-C
HDMI ports quantity	0
USB 2.0 ports quantity	1
Bluetooth version	5.0
Slow motion	4 x
Video resolutions	2560 x 1440 pixels
Maximum frame rate	120 fps
Supported video modes	1440p
Video formats supported	H.264, MP4
Total megapixels	1440 MP
Optical sensor size	1/2.3 \
Image formats supported	DNG, INSP
Still image resolution(s)	FlowState Stabilization
Storage media	Internal memory
Fixed focal length	2.2 mm
Harmonized System (HS) code	85258091
Warranty period	1 year(s)

Weight and Dimensions

Depth	20.7 mm
Width	23.6 mm
Height	52.9 mm
Weight	26.5 g
Battery weight	8 g