EasyManua.ls Logo

instagrid ONE max User Manual

Default Icon
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
USER MANUAL V2.0

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the instagrid ONE max and is the answer not in the manual?

instagrid ONE max Specifications

General IconGeneral
Output Power2300 W
Battery Capacity2.1 kWh
AC Input Frequency50/60 Hz
Operating Temperature-10°C to 40°C
Battery TypeLithium-ion
AC Input Voltage100-240V
Charging Time3 hours
ProtectionOverload, short circuit, over temperature
Cycle Life1000 cycles
Ports2 x USB-A, 1 x USB-C

Summary

A - SYMBOLS

Critical Safety Symbols

Explains critical safety symbols like Danger, Warning, Caution, and electric shock warnings.

General Information Symbols

Covers symbols for reading manuals, checks, CE marking, and disposal directives.

B - SAFETY NOTES

B.1 - Intended Use

Defines the purpose of the instagrid ONE max for mobile power supply of electrical devices.

B.2 - Using Safety Notes

Emphasizes reading and following all safety notes and instructions to prevent hazards.

B.3 - Safe Handling Rules

Covers crucial handling rules like not opening, avoiding water/heat, stable positioning, and checking for damage.

D - WARRANTY INFORMATION

1. Scope of Supply

Details the items included in the delivery and advises checking for completeness upon receipt.

2. DEVICE DESCRIPTION

2.1 Connections, Controls & Display

Identifies and explains the various connectors, controls, and indicators on the device.

2.2 Technical Data

Provides detailed specifications such as output voltage, power ratings, dimensions, weight, and protection class.

3. SAFETY CONSIDERATIONS

3.1 & 3.2 Outlet Protection

Explains passive/active protection at the outlet, including IT network and overload mechanisms.

3.3 User Safety Measures

Advises on extra protective measures such as using RCDs and managing cable extensions.

3.4 Inlet Protection

Explains that the charging inlet is protected from overload by a fuse.

4. INITIAL COMMISSIONING

5. OPERATING STATES & OPERATION

5.1 Concept of Operation

Explains how the rotary switch selects operating states and how LEDs indicate status.

5.2 Key Operating States

Describes OFF, CHARGE, DISCHARGE, and TRANSPORT states and their characteristics.

5.3 FEATURES

5.3.1 Starter Battery

Explains the function and charging behavior of the starter battery within the device.

6. WARNINGS AND FAULTS

6.1 Warnings

Details warning states indicated by yellow LEDs and how to acknowledge them.

6.2 Faults

Explains fault states indicated by red LEDs and the need for specialist intervention.

7. SERVICE AND MAINTENANCE

7.1 Replacing Charging Inlet Fuse

Instructions for safely replacing the input fuse and precautions to take.

7.2 Replacing the Frame

Details how the user can replace the device frame if it gets damaged.

8. MISCELLANEOUS

8.1 Storage

Provides guidelines for storing the device, including TRANSPORT mode and temperature.

8.2 Transport and Shipping

Details notes on transporting the device, including hazardous goods regulations.

8.3 Cleaning and Care

Instructions on how to clean the device safely, including what not to use.

9. MANUFACTURER'S DECLARATION

9.1 Declaration of Conformity

Confirms the device meets applicable EU directives and relevant amendments.

9.2 WEEE Declaration / Disposal

Provides information on the environmentally friendly disposal of the device according to WEEE directives.

10. CONTACT

10.1 General Enquiries

Contact details for general questions about the instagrid ONE max.

10.2 Damage or Repair

Contact information specifically for reporting damage or arranging repairs.

10.3 Address

The physical address of the manufacturer, instagrid GmbH.