Instant 140-6013-01 User Manual

10
Your Multi-function coffee maker
To turn Altitude Mode off
1. Make sure your Instant Multi-function coffee maker is on.
2. Press and hold the 8 oz and 10 oz buttons at the same time for
3 seconds.
3. Wait until the 8 oz and 10 oz buttons blink twice.
Low water alert
While or after brewing, your coffee maker will notify you the water
tank is nearly empty. If this happens during a brewing cycle, the Water
LED on the control panel will start flashing and the brewing program
will continue.
While in this low water state, both the Water LED and Power button will
remain lit. You cannot run another brewing program until you add water
to the tank.
Adding water
1. Either remove the water tank from the coffee maker or leave the tank
on the unit.
2. Fill the water tank with clean, cold water.
3. Place the water tank back onto the coffee maker or close the water
tank lid.
4. Begin brewing your next cup of coffee.
You must add water before brewing your next cup of coffee.
DO NOT operate this coffeemaker without water in the water tank.
140-6013-01-0101_DualPodPlus_CoffeeMaker_US_Manual_FINAL.indd 10140-6013-01-0101_DualPodPlus_CoffeeMaker_US_Manual_FINAL.indd 10 7/14/21 4:10 PM7/14/21 4:10 PM

Instant 140-6013-01 Specifications

General

Brand	Instant
Model	140-6013-01
Category	Coffee Maker
Language	English