Instant 140-6016-01 - User Manual

Need help?

Do you have a question about the Instant 140-6016-01 and is the answer not in the manual?

Summary

Your Instant Solo Coffee Maker

Control panel

Overview of the Instant Solo Coffee Maker control panel.

Plug-in and time-out

Explains the plug-in process and automatic standby mode.

Sound Settings

How to enable or disable button-pressing sounds and reminder beeps.

Altitude Mode

Instructions for enabling and disabling Altitude Mode for high altitudes.

Water Empty Alert

Notification when the water tank is empty and how to exit alert mode.

Before you brew

Initial set up

Steps for setting up the Instant Solo coffee maker after unboxing.

Clean before use

Instructions for cleaning the coffee maker and accessories before the first use.

Initial Cleaning

Steps for running a cleaning program before brewing the first cup of coffee.

Brewing Coffee

Reusable Coffee Pod and Coffee Pods

Information on brewing with K-Cup pods or the included reusable coffee pod.

How to brew coffee

Step-by-step guide on how to prepare and brew coffee.

Care, Cleaning, Storage

Descaling; Removing Mineral Deposits

Instructions for descaling the coffee maker to remove mineral deposits.

Learn more

Register your product

Link and instructions for registering the Instant Solo Coffee Maker.

Contact Consumer Care

Contact information for customer support and assistance.

Replacement parts and accessories

Information on how to obtain replacement parts and accessories.

Connect and Share

Social media and connection information for the brand.

Product specifications

Technical details and specifications of the coffee maker.

Summary

Your Instant Solo Coffee Maker

Control panel

Overview of the Instant Solo Coffee Maker control panel.

Plug-in and time-out

Explains the plug-in process and automatic standby mode.

Sound Settings

How to enable or disable button-pressing sounds and reminder beeps.

Altitude Mode

Instructions for enabling and disabling Altitude Mode for high altitudes.

Water Empty Alert

Notification when the water tank is empty and how to exit alert mode.

Before you brew

Initial set up

Steps for setting up the Instant Solo coffee maker after unboxing.

Clean before use

Instructions for cleaning the coffee maker and accessories before the first use.

Initial Cleaning

Steps for running a cleaning program before brewing the first cup of coffee.

Brewing Coffee

Reusable Coffee Pod and Coffee Pods

Information on brewing with K-Cup pods or the included reusable coffee pod.

How to brew coffee

Step-by-step guide on how to prepare and brew coffee.

Care, Cleaning, Storage

Descaling; Removing Mineral Deposits

Instructions for descaling the coffee maker to remove mineral deposits.

Learn more

Register your product

Link and instructions for registering the Instant Solo Coffee Maker.

Contact Consumer Care

Contact information for customer support and assistance.

Replacement parts and accessories

Information on how to obtain replacement parts and accessories.

Connect and Share

Social media and connection information for the brand.

Product specifications

Technical details and specifications of the coffee maker.

The Instant Solo Coffee Maker is a single-serve coffee machine designed for ease of use and convenience, allowing users to brew coffee using either K-Cup® pods or their own ground coffee with a reusable pod. The device emphasizes sustainability through its packaging and offers various features to customize the brewing experience and ensure proper maintenance.

Function Description:

The Instant Solo Coffee Maker's primary function is to brew single-serve coffee. It operates by heating water and passing it through a coffee pod or ground coffee to produce a hot beverage. Users can select from three serving sizes: 8 oz, 10 oz, and 12 oz. A "Bold" setting is available for those who prefer a stronger, more flavorful cup of coffee, which works by increasing the brewing time to extract more flavor from the coffee grounds or pod. The coffee maker is designed for simple operation with an intuitive LED control panel.

Important Technical Specifications:

Model: SSCM-1000
Volume: 40 oz / 1183 mL water tank capacity
Wattage: 1250 watts
Power: 120V/60Hz
Weight: 2.1 kg (4.63 lbs)
Dimensions:
- Inches: 12.6 H x 5.3 W x 11.8 D
- Centimeters: 32 H x 13.5 W x 30 D

Usage Features:

Control Panel: The control panel includes a Power On/Off button, a "Bold" button for stronger coffee, and dedicated buttons for 8 oz, 10 oz, and 12 oz serving sizes.
Water Tank: The water tank is removable from the Instant Solo Coffee Maker base, making it easy to fill and clean. It has a lid and clear markings for MAX fill line.
Brewing Lid Latch: Ensures the brewing lid is securely closed during operation.
Drip Tray: Removable for easy cleaning and to accommodate different mug sizes.
Reusable Coffee Pod with Handle: Included with the coffee maker, allowing users to use their own medium to medium-fine ground coffee (approximately 2 tablespoons).
Plug-in and Time-out: Upon plugging in, the device beeps. Pressing the power button turns on the LED buttons. The coffee maker enters standby mode after 30 minutes of inactivity (LED panel dims) and shuts off completely after another 2 hours of inactivity.
Sound Settings: Users can turn button-pressing sounds and reminder beeps on or off by pressing and holding the 8 oz and 12 oz buttons simultaneously for 3 seconds until they blink twice. Device failure sounds cannot be deactivated.
Altitude Mode: For users at +5,000 feet sea level, Altitude Mode can be enabled or disabled. To turn on, press and hold the 8 oz and 10 oz buttons for 3 seconds until they blink twice. To turn off, press and hold the 8 oz and 10 oz buttons for 3 seconds until they blink three times.
Water Empty Alert: The device alerts the user with a beep and flashing LED control panel when the water tank is empty or nearly empty. Brewing stops, and the alert can be exited by pressing any button after refilling the tank.
Brewing Process:
1. Fill the water tank to the MAX fill line.
2. Place a K-Cup® pod or the reusable coffee pod (with ground coffee) in the brewing housing container.
3. Close and latch the brewing lid.
4. Optionally, press "Bold" for a stronger brew.
5. Select the desired serving size (8 oz, 10 oz, or 12 oz). The selected button flashes during water heating and illuminates when brewing begins.
6. Brewing can be stopped at any time by pressing the selected cup size button again.
7. Once brewing is complete and dripping stops, discard the used pod or grounds.

Maintenance Features:

Initial Set Up: Involves removing packaging, placing the Solo on a stable surface, removing a foam cushion from under the water tank, and plugging in the device.
Clean Before Use: Before the first brew, the water tank and reusable coffee pod should be hand-washed with warm water and dish soap, rinsed, and dried. The coffee maker base and control panel should be wiped with a damp cloth.
Initial Cleaning Program: Before brewing the first cup of coffee, a cleaning program should be run without a coffee pod. This involves filling the water tank to MAX with cold water, placing a large mug under the spout, and running two brewing cycles (8 oz and 10 oz) to flush the system.
Regular Cleaning:
- Water Tank: Remove and handwash with dish soap and warm water.
- Reusable Coffee Pod: Remove and handwash with dish soap and warm water, or place in the top rack of a dishwasher.
- Stainless Steel Drip Tray: Remove and wash by hand with dish soap and warm water, or place in the top rack of a dishwasher.
- Coffee Maker / LED Panel: Clean the outside with a damp dish cloth.
- Power Cord: DO NOT fold when storing.
Descaling / Removing Mineral Deposits: Regular descaling is recommended to prevent mineral buildup, which can affect brew temperature and strength. The 10 oz and 12 oz keys will flash after 300 cycles as a reminder.
- Descaling Process:
  1. Combine a descaling solution (Household descaler:water ratio 1:4, or Citric acid:water ratio 3:100).
  2. Ensure the reusable pod is in the brewing housing unit.
  3. Fill the water tank to the MAX line with the cleaning mixture.
  4. Place a large container (at least 40 oz / 1183 mL) under the drop nozzle and ensure the brewing lid is latched.
  5. Touch and hold the 10 oz and 12 oz keys for 3 seconds. The mixture will run through until the tank is empty.
  6. Discard the mixture, place the emptied container back.
  7. Rinse the water tank and fill to MAX with cool, clean water.
  8. Touch and hold the 10 oz and 12 oz keys for 3 seconds again to rinse the appliance.
  9. Discard the rinse water.
Safety Warnings:
- Brewing reaches high temperatures; avoid touching the brewing housing unit or spout during the process to prevent injury.
- The coffee maker contains electrical components. Hand wash only.
- DO NOT rinse or immerse the coffee maker, power cord, or plug in water or other liquids to avoid fire, electric shock, or personal injury.
- Use a large enough container for descaling to hold the entire contents of the water tank to avoid personal injury and/or property damage from hot water.

The manual also provides resources for product registration, consumer care contact information, and replacement parts and accessories, all accessible via the Instant Brands website.