Instant 140-6013-01 User Manual

12
Before you brew
Initial Cleaning
Before you brew your first cup of coffee, clean your Instant Multi-function
coffee maker. Run the following cleaning program without
a coffee pod or the reusable coffee pod.
1. Lift the water tank from the back of the coffee maker and remove the
water tank lid.
2. Fill the water tank with cold water to the MAX fill line as indicated on
the water tank.
3. Put the lid back onto the water tanks and place the water tank back
onto the coffee maker.
4. Place a large mug which can hold at least 10 oz of liquid beneath the
brew spout and onto the drip tray.
5. Close the brewing lid and ensure it’s securely latched.
Press 8 oz button. The key flashes as the water heats.
6. The 8 oz button will illuminate and the coffee maker begins a brewing
cycle, and hot water will pour from the brew spout. After the brewing
cycle ends or is cancelled and the water stops dripping from the spout,
discard the water in the mug. To stop brewing at any time, touch
8 oz again.
7. Place the mug back on the drip tray.
8. Touch 10 oz. The button flashes as the water heats.
9. The 10 oz button will illuminate and the coffee maker begins a brewing
cycle, and hot water will pour from the brew spout. After the brewing
cycle ends or is cancelled and the water stops dripping from the spout,
discard the water in the mug. To stop brewing at any time, touch
10 oz again.
Be careful: Brewing reaches high temperatures. DO NOT touch the
brewing housing unit or spout during the brewing process. Touching
hot surfaces may result in personal injury and/or property damage.
140-6013-01-0101_DualPodPlus_CoffeeMaker_US_Manual_FINAL.indd 12140-6013-01-0101_DualPodPlus_CoffeeMaker_US_Manual_FINAL.indd 12 7/14/21 4:10 PM7/14/21 4:10 PM

Instant 140-6013-01 Specifications

General

Brand	Instant
Model	140-6013-01
Category	Coffee Maker
Language	English