The Instant® Cold Brewer is a kitchen appliance designed to make cold brew coffee and iced tea quickly and efficiently. Utilizing FlashExtract™ technology, it can produce true cold brew in under 20 minutes, a significant reduction from the traditional 24-hour brewing process. This device aims to provide a convenient way to enjoy café-quality cold brew at home.
Function Description:
The Instant Cold Brewer is primarily used for brewing cold coffee and iced tea. It operates by circulating water through ground coffee or loose tea leaves within a brew basket, extracting flavor without the use of heat. The FlashExtract™ technology accelerates this process, allowing for rapid cold brewing. The device features a control panel with flat-touch buttons for setting brewing time, and a digital display to show the remaining time. It supports various brew times, with a maximum of 30 minutes, to achieve different strengths of coffee or tea. For even bolder cold brew, the initial brew on the power base can be followed by an overnight steep in the refrigerator.
Important Technical Specifications:
- Model: CBCM-1000
- Volume: 32 oz / 946 mL (glass pitcher capacity)
- Wattage: 15 W
- Power: 120V / 60Hz
- Weight: 2.5 lb / 1.13 kg
- Dimensions:
- Inches: 6.7 L x 7.9 W x 9.8 H
- Centimeters: 17 L x 20 W x 24.9 H
- Brewing Time:
- Coffee (2 servings): 15 minutes
- Coffee (4 servings): 20 minutes
- Coffee (4 servings, bolder): 5 minutes on power base + 12-16 hours in fridge
- Iced Tea (2 servings): 20 minutes
- Iced Tea (4 servings): 20 minutes
- Coffee Capacity: Up to 70 grams of medium-ground coffee. Recommended ratio is 14:1 water-to-coffee.
- Tea Capacity: Up to 6 teaspoons (2 tablespoons) of loose tea leaves.
Usage Features:
The Instant Cold Brewer is designed for ease of use.
- Initial Setup: Involves removing packaging, ensuring the brew basket's bottom cap is secure, placing the brew basket into the glass pitcher, and then placing the pitcher onto the power base.
- Control Panel: Features "Cancel," "Decrease time," "Increase time," and "Start" buttons. The time display shows the set brewing duration. Buttons are flat-touch, requiring a light touch.
- Brewing Process:
- Plug in and turn on the brewer (power switch at the rear of the power base).
- Fill the glass pitcher with water and place it on the power base.
- Fill the brew basket with coffee grounds (medium grind recommended, avoid fine grind) or loose tea leaves (avoid tea bags or large leaves/stems/dried fruits). Do not overfill.
- Insert the loaded brew basket into the glass pitcher through the handle housing.
- Place the lid onto the glass pitcher, ensuring it's turned to the closed position with the pour spout closed.
- Use the '+' and '–' buttons on the control panel to set the desired brewing time (up to 30 minutes). Holding '+' adds time in 5-minute increments.
- Press "Start" to begin brewing. Brewing can be canceled at any time by pressing "X."
- Once the timer reaches "00," brewing is complete.
- Remove the lid and brew basket.
- Unscrew the brew basket bottom to discard grounds or tea leaves.
- Place the lid back onto the glass pitcher and turn it to open the pour spout for serving.
- Error Codes: An "E1" display indicates the agitator at the bottom of the brew basket is jammed, often due to overfilling or large tea ingredients. The solution involves removing the brew basket, clearing obstructions, and refilling without overfilling.
- Troubleshooting: Addresses issues like loud noise during brewing (brew basket not properly in place), less water than initially used (water trapped in brew basket), and brewer stopping prematurely (pitcher not on power base or brew basket not fully assembled).
Maintenance Features:
Regular cleaning is essential for optimal flavor and to prevent mineral buildup.
- Dishwasher Safe Parts: The glass pitcher, lid, brew basket, and coffee scoop are all dishwasher safe (top rack recommended) or can be handwashed with soap and warm water.
- Power Base and Control Panel: These parts should be wiped down with a damp cloth while unplugged.
- Important Safety Precautions for Cleaning:
- Always unplug the power base before cleaning.
- NEVER place the power base into a dishwasher or submerge it in water or other liquids, as it contains electrical components.
- Do not use metal scouring pads, abrasive powders, or harsh chemical detergents on any parts.
- Ensure all parts are thoroughly dried before reassembly and storage.
- DO NOT fold the power cord when storing.
- Any servicing beyond routine cleaning should be performed by a qualified service technician.
The Instant Cold Brewer offers a modern, fast, and convenient approach to enjoying cold brew coffee and iced tea, backed by specific guidelines for optimal performance and longevity.
Need help?
General
To Next Page
