Need help?Do you have a question about the INSTEON 2842-222 and is the answer not in the manual?
Configure settings like Night-Only mode and Light Sensitivity via the INSTEON Hub.
Affix mount to surface, slide into retention slot. Avoid rapid heat change areas.
Follow on-screen instructions to add your Motion Sensor to the INSTEON Hub.
Remove cover, press/hold set button until LED blinks, then tap set button for double-blink.
Receive email/text alerts when motion is detected by switching on alerts in the INSTEON app.
Add your Motion Sensor to a scene using the INSTEON Hub to control the scene.
For the complete Owner's Manual, video tutorials, and product support, visit insteon.com/support.
Configure settings like Night-Only mode and Light Sensitivity via the INSTEON Hub.
Affix mount to surface, slide into retention slot. Avoid rapid heat change areas.
Follow on-screen instructions to add your Motion Sensor to the INSTEON Hub.
Remove cover, press/hold set button until LED blinks, then tap set button for double-blink.
Receive email/text alerts when motion is detected by switching on alerts in the INSTEON app.
Add your Motion Sensor to a scene using the INSTEON Hub to control the scene.
For the complete Owner's Manual, video tutorials, and product support, visit insteon.com/support.
General| Type | Motion Sensor |
|---|---|
| Wireless Protocol | INSTEON |
| Power Source | Battery |
| Item Weight | 4 ounces |
| Operating Frequency | 915 MHz |
| Technology | Passive Infrared (PIR) |
| Field of View | 90 degrees |
| Communication Protocol | INSTEON |
| Weight | 4 ounces |
| Mounting Type | Wall |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Batteries | 2 AA batteries required |
To Next Page
