EasyManuals Logo

InStyler Cerasilk User Manual

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PATENTED COOL TOUCH
GRIP TIP WITH SILICONE
BRISTLES
1” CERASILK BARREL
PROFESSIONAL CERAMIC
HEATERS
AUTOMATIC SHUT OFF
DIGITAL TEMPERATURE
CONTROL
8’ PROFESSIONAL SWIVEL
CORD
POWER BUTTON
LED TEMPERATURE
INDICATOR LIGHTS
Woven Ceramic Curling Iron
DIRECTIONS
To turn the device on, plug it into an electrical outlet and press the Power Button
until the LED Temperature Indicator Lights are illuminated. CERASILK will always
turn on to the 400°F setting. Press the Power Button again to select the desired
temperature as indicated by the LED Temperature Indicator Lights. Keep
pressing the Power Button to cycle through the adjustable temperature settings.
The lights will ash until the selected temperature is achieved.
The CERASILK Woven Ceramic Curling Iron has 4 Heat Settings: 300°F, 350°F,
375°F, 400°F. The tool is on the Max temperature setting when all of the LED
Temperature Indicator Lights are lit.
Recommended temperatures by hair type:
HAIR TYPE SETTING TEMPERATURE
thick, coarse, curly High/Max 375°F - 400°F
normal, medium, wavy Medium/High 350°F - 375°F
ne, thin Low 300°F
To use the patented cool touch grip tip, take a one inch section of hair and hold
it out to the side. Take the curling iron and insert the hair at mid-shaft into the
silicone bristles. Slide the tip of the iron down the hair section to the desired
position, then twirl it towards the root and hold it for several seconds until the
style is set. You can place your free hand on the tool tip for more control while
styling. When ready, for a tighter curl either unwind and remove the hair from
the silicone bristles, or remove the hair from the silicone bristles and then let the
curl drop. Pulling the iron down to loosen the hair from the bristles will create a
more undone look.
When you are done using the tool, press the Power Button until all of the LED
lights are off. If you forget to turn off your CERASILK Woven Ceramic Curling Iron,
the Automatic Shut Off will turn the device off after 60 minutes. To reactivate the
device, press the Power Button.
SAVE THESE INSTRUCTIONS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the InStyler Cerasilk and is the answer not in the manual?

InStyler Cerasilk Specifications

General IconGeneral
Plate MaterialCeramic
Heat SettingsVariable
Max Temperature400°F
Cord TypeSwivel
Auto Shut-OffYes
Plate Width1 inch
Voltage120V
Cord Rotation360 degrees

Related product manuals