Intec ColorCut LC600 Series User Manual

Intec Printing Solutions - Manual for ColorCut LC600 Sheet fed Label Cutter .......................................................................... Page No: 1
Digital Sheet Label Die-Cutter
ColorCut LC600 Series
Installation Guide - English
Revision: 1.4 0718
O
N
L
I
N
E
/
O
F
F
L
I
N
E
E
N
T
E
R

Intec ColorCut LC600 Series Specifications

General

Max Cutting Speed	960mm/s
Connectivity	USB, Ethernet
Cutting Width	600mm
Blade Type	Drag knife
Repeatability	±0.1mm
Power Supply	AC 100-240V, 50/60Hz
Software	ColorCut Pro
Cutting Speed	960mm/s
Software Compatibility	Adobe Illustrator, CorelDRAW

Summary

Preface -THE INTEC COLORCUT FLATBED SERIES

Safety Information

Safety measures and precautions for operating the Intec LC600 cutter.

Installing your LC600 (Overview of steps)

Safety Information

Safety measures

Lists critical safety measures and precautions to be taken before and during operation of the cutter.

Hardware Specifications

Installation of the LC600 Cutter (Overview of steps)

INSTALLATION START

Chapter 2 - SETTING UP A WI-FI HOTSPOT

2.1 Using Wi-Fi to connect to LC600 - Live Video Feed

2.2 How to create a HotSpot (2 different approaches)

2.3 Method 1 - Using Windows Wi-Fi HotSpot

Step-by-step guide for setting up a Wi-Fi hotspot using Windows.

Setting the SSID when using Windows Wi-Fi HotSpot

Details how to set the Network Name (SSID) and password for the Windows Wi-Fi hotspot.

Starting the Windows HotSpot

Instructions on how to start and enable the Windows Wi-Fi hotspot connection.

Daily Operation - Enabling Windows Wi-Fi HotSpot

2.4 Method 2 - Using Wi-Fi Direct Access Point

Configuring Windows Wi-Fi Direct Access Point

Chapter 3. Software Installation - Intec ColorCut Pro

3.4.1 Software Installation - Intec ColorCut Pro (Cont.)

Continues the Intec ColorCut Pro installation, including integration steps for Adobe Illustrator and CorelDRAW.

3.3 Intec ColorCut Pro - for CorelDRAW

Intec ColorCut Pro - for CorelDRAW (Cont)

3.4 Intec ColorCut Pro (Activation)

Guide for activating the Intec ColorCut Pro software online or manually.

Chapter 4. Connecting and powering on the cutter

4.1 Turning the cutter on (The Initialisation Process)

Details the process of turning on the Intec LC600 cutter and its initialisation sequence.

4.2 Connecting to your computer

Instructions on connecting the Intec LC600 cutter to your computer using a USB cable.

4.3 ColorCut Pro - USB Connection confirmation

4.4 ColorCut Pro - Device Type

Chapter 5 - The Intec ColorCut LC600 Cutting Tool

5.3 Replacing the blade

5.4 Blade Adjustment (Adjusting the Blade length)

Instructions on how to adjust the blade depth and length for optimal cutting.

5.5 Installing Tools in your ColorCut

Chapter 6 Using the ColorCut LC600 Cutter

6.1 Overview of control Panel

6.1 THE CONTROL PANEL (Cont.)

The TEST screen

6.2 Checking the Blade depth & Force

Guide for performing test cuts to check and adjust blade depth and force.

6.3 Calibration the Vision3 sensor offset to the Cutting Blade

Instructions for calibrating the Vision3 sensor offset to the cutting blade using the pen tool.

ColorCut Pro - Setting the Sensor Offset to the Blade

Steps within ColorCut Pro to set the sensor offset to the blade using the live preview.

ColorCut Pro - Setting the Sensor Offset (Cont.)

Continues setting the sensor offset in ColorCut Pro, including media size selection and AutoFind.

Changing the Dual Grip Roller

Graphics File Design - Creating your Artwork

Organizing Graphics in Layers