EasyManua.ls Logo

Integra CDC-3.4 - Page 12

Integra CDC-3.4
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Connecting
the
CDC~3.4-Continued
With
R I
(Remote Interactive) you can control the
CDC-3.4 together with your other
R
!-compatible Inte-
gra/Onkyo
AV
components. With some Integra/Onkyo
AV
receivers you can use one remote controller to con-
trol all your
Integra/Onkyo
components and use the fol-
lowing special
R I
functions:
Auto Power
On
If
your CDC-3.4 is connected to
an
R
!-compatible Inte-
gra/Onkyo
AV
receiver, when you
tum
on the CDC-3.4,
the
AV
receiver will turn on and select the CDC-3.4 as
the input source.
Direct Change
If
your CDC-3.4 is connected to an
R
!-compatible Inte-
gra/Onkyo
AV
receiver, when you start playback on the
CDC-3.4, the
AV
receiver will select the CDC-3.4 as the
input source.
Auto Power
Off
When you set an
R
!-compatible
Integra/Onkyo
AV
receiver to Standby, all other
AV
components connected
via
R I
enter Standby as well.
Dimmer
When you dim the display brightness on an
R
!-compat-
ible
Integra/Onkyo
AV
component, the displays on all
other
AV
components connected via
R I
are dimmed as
well.
To
use the
R I
functions, you need to connect one
of
the
CDC-3.4's
Rl
connectors to an
Rl
connector on
another
AV
component in your system by using the sup-
plied
R I
cable.
See the manuals supplied with your other
R
!-compati-
ble
AV
components for more information.
Notes:
Use
only
R I
cables for
R I
connections.
To
use
R I
you
must
make
an
analog RCA/phono
connection between
your
CDC-3.4
and
Integral
Onkyo
A
V
receiver even
if
they
are
connected
digi-
tally.
The CDC-3.4 has two
R I
connectors.
You
can con-
nect either one to your Integra/Onkyo
AV
receiver.
The other connector is for connecting additional
R
!-
compatible components.
Connect the CDC-3.4's
R I
connector to only Integral
Onkyo
AV
components. Connecting to other manufac-
turer's
AV
components may cause them to malfunc-
tion.
Some
Integra/Onkyo
R
!-compatible
AV
components
may not support the special functions described here.
To
use
Rl
you
must
make an
analog
audio
connection
(RCA/phono)
between
the
CDC-3.4
and
your
other
lntegra/Onkyo
equipment
even
if
they
are connected
digitally.
Rl
cable
Coaxial cable (not supplied)
RCNphono
audio connecting cable
L
R
CD
Coaxial IN
Rl
Hi-fi amp,
AV
receiver

Related product manuals