To Next PageTo Next Page
Need help?Do you have a question about the Integra CDC-3.1 and is the answer not in the manual?
Audio Output| number of channels | 2 (stereo) |
|---|---|
| frequency response | 5 Hz - 20 kHz |
| total harmonic distortion | 0.005% (at 1 kHz) |
Power| power consumption | 10 watts |
|---|---|
| power supply | 120 V, 60 Hz |
| output level | 2 volts r.m.s. |
Performance| dynamic range | 96 dB |
|---|---|
| signal to noise ratio | 92 dB |
| channel separation | 92 dB (at 1 kHz) |
Optical System| signal readout system | Optical non-contact |
|---|---|
| reading rotation | About 500 - 200 r.p.m. |
| linear velocity | 1.2 - 1.4 m/s |
Weight and Dimensions| dimensions | 435× 131× 433mm |
|---|---|
| weight | 6.9 kg |
Follow all operating instructions, retain manuals, and heed all warnings for safe use.
Avoid water, ensure ventilation, keep away from heat, and use appropriate carts/stands.
Use correct power sources, follow polarization rules, and protect power cords.
Clean as recommended, unplug when not in use, prevent object entry, and refer servicing to qualified personnel. Includes laser safety.
Details on FCC rules, interference, and user modifications for digital devices.
Notes compliance with Canadian ICES-003 standards and polarized plug instructions.
Lists playable discs and warns against using irregular or damaged discs.
Record serial number for warranty; ensure correct power supply voltage before first use.
Proper location, ventilation, cleaning, and handling to maintain performance and prevent damage.
Avoid touching with wet hands, protect from condensation, and close tray when moving.
Highlights 6-disc changer, continuous play, and track selection features.
Details on D/A converter, quartz system, oversampling, and digital output.
Explains repeat modes, time display, remote control compatibility, and disc intro scan.
Describes the battery-free memory backup system and its operation during power interruptions.
Identifies and describes the function of each button and indicator on the front panel.
Explains the meaning of various indicators shown on the unit's display.
Lists and illustrates the accessories included with the CD changer.
Details the purpose and operation of each button on the remote controller.
Instructions for inserting batteries and notes on their care and replacement.
Provides tips for optimal remote operation, including placement and avoiding interference.
Guides on connecting analog and digital audio outputs to an audio system.
Explains how to connect components using the RI cable for system remote control.
Instructions for connecting the power cable and turning the unit on for the first time.
Step-by-step guide to loading discs and starting playback.
Instructions on how to swap discs while the unit is playing.
Important advice on how to handle CDs to prevent damage and ensure playback quality.
How to pause, stop, and resume CD playback.
Use buttons to fast forward or reverse within a track during playback.
How to view elapsed or remaining time for tracks and discs.
How to select and play a specific disc directly.
Using skip buttons or number buttons to choose a specific track to play.
Navigating to next/previous tracks or discs, and during memory/random play.
Plays the beginning of each disc for quick content preview.
Using the Next Selection button to choose the subsequent track or disc.
How to cancel a previously made track or disc selection.
Enters random mode to play all tracks from all discs in a random sequence.
Activates repeat mode to play all tracks from all discs continuously.
Instructions for storing up to 40 tracks into memory for programmed playback.
How to initiate playback of the stored tracks in the programmed order.
Removes the most recently stored track from memory.
Resets the entire memory contents by turning off the MEMORY indicator.
View stored program numbers, track numbers, and disc numbers in memory.
Provides solutions for common problems like no power, playback issues, and sound problems.
Lists detailed technical data including dimensions, weight, power, and performance metrics.
