Integra CDC-3.1 User Manual

9
123
456
DISC No.
TRACK
SINGLE ELAPSED
123
456
DISC No.
TRACK
SINGLE
REMAIN
123
456
DISC No.
TRACK
REMAINTOTAL
b
d
a
c
//
REMOTE CONTROLLER RC-435C
Stop
Pause
Display
/
/
Pause
Stop
Play
Display
Display
Display
Playing CDs
Search play
Hold down the / button to fast forward the
current track during playback.
Hold down the / button to fast reverse the
current track during playback.
Release the
/ or / button when you
reach the point on the track you want to play back.
You can also use the remote controller to search
by using the
and buttons instead of the /
and / buttons.
• The unit starts fast forwarding at 10-times speed,
and after four seconds at 60-times speed.
• During the fast forward operation, you will hear a
cueing sound at low volume.
• When the end of the disc is reached, the unit will
play back the next disc.
• If you locate the top of the disc, the unit will can-
cel the fast forward operation and start playing
back from the top of the disc (Track 1).
Stopping playback temporarily
Press the Pause button.
The PAUSE indicator will light up. To resume playback,
press the Play button, or press the Pause button
again. The CD changer starts playing again from
exactly the point at which it stopped.
Stopping playback
Press the Stop button.
• When you open the loading drawer, the disc that
was playing will be in the front disc tray.
Checking the elapsed or remaining time
Press the Display button during playback.
The display changes each time you press the Dis-
play button.
a
SINGLE ELAPSED: Indicates how long the current
track has been playing.
b
SINGLE REMAIN: Indicates how much time is left
for the current track. For beyond the 20th track,
the unit displays “--: --”.
c
TOTAL REMAIN: Indicates how much time is left
for the entire disc to play. During memory play,
this display indicates the playing time remaining
for the entire sequence of tracks programmed
into memory.
d
The display returns to SINGLE ELAPSED time dis-
play.
CDC-3.1_08-13 09/05/2000, 4:24 PM9

Integra CDC-3.1 Specifications

Audio Output

number of channels	2 (stereo)
frequency response	5 Hz - 20 kHz
total harmonic distortion	0.005% (at 1 kHz)

Power

power consumption	10 watts
power supply	120 V, 60 Hz
output level	2 volts r.m.s.

Performance

dynamic range	96 dB
signal to noise ratio	92 dB
channel separation	92 dB (at 1 kHz)

Optical System

signal readout system	Optical non-contact
reading rotation	About 500 - 200 r.p.m.
linear velocity	1.2 - 1.4 m/s

Weight and Dimensions

dimensions	435× 131× 433mm
weight	6.9 kg