Integra CDC-3.1 User Manual

10
//
Disc 1 Disc 2 Disc 3 Disc 4 Disc 5 Disc 6
DISC 1 DISC 2 DISC 3
DISC 4 DISC 5 DISC 6
REMOTE CONTROLLER RC-435C
123
+10 0
456
789
REMOTE CONTROLLER RC-435C
/
/
Play
Play
Playing CDs
Starting playback from a given disc
Press the Direct Play button of a disc you wish to
play back (Disc 1-Disc 6) on the front panel or the
remote controller.
• The unit will play back the selected disc.
• If you press the Direct Play button (Disc 1-Disc 6)
during playback, the playback will be cancelled
and the unit will start playing back Track 1 of the
selected disc.
• If you press the Disc Skip button during playback,
the playback will be cancelled and the unit will
start playing back Track 1 of the next disc. (If the
playback of Disc 6 is cancelled, the unit will start
playing back Disc 1.)
• You can select a disc by pressing the Disc Skip
button while the playback is stopped. After you
select a disc, press the Play button to start play-
back from Track 1.
Starting playback from a given track
Using Skip buttons to select a playback track
1. While the unit is stopped, press the / or /
button to select a track.
• Do not hold down the button. Press it repeatedly.
• The TRACK number indicator will display the se-
lected track number.
2. Press the Play button.
• The unit will start playing back from the selected
track.
Using the number buttons to select a
playback track
1. Select the track number you wish to play back
using the number buttons.
The CD changer will start playing automatically.
You do not need to press the Play button.
• The +10 number button is used to select a track
with a number of 10 or higher. For example, to
select Track Number 30, press this button three
times, and then press 0.
• If you do not select a track, playback will start
from the first track on the selected disc.
CDC-3.1_08-13 09/05/2000, 4:24 PM10

Integra CDC-3.1 Specifications

Audio Output

number of channels	2 (stereo)
frequency response	5 Hz - 20 kHz
total harmonic distortion	0.005% (at 1 kHz)

Power

power consumption	10 watts
power supply	120 V, 60 Hz
output level	2 volts r.m.s.

Performance

dynamic range	96 dB
signal to noise ratio	92 dB
channel separation	92 dB (at 1 kHz)

Optical System

signal readout system	Optical non-contact
reading rotation	About 500 - 200 r.p.m.
linear velocity	1.2 - 1.4 m/s

Weight and Dimensions

dimensions	435× 131× 433mm
weight	6.9 kg