Integra CDC-3.1 User Manual

11
/
123
456
DISC No.
TRACK
REMAIN
SINGLE
123
456
DISC No.
TRACK
REMAIN
SINGLE
123
456
DISC No.
TRACK
REMAIN
SINGLE
/
/
REMOTE CONTROLLER RC-435C
DISC
INTRO SCAN
REMOTE CONTROLLER RC-435C
/
/
//
Stop
Playing CDs
Skip playback
Use the / and / buttons.
You can also use the remote controller to operate
the unit by using the and buttons instead of
the
/ and / buttons.
During playback, press the
/ button.
The CD changer will stop playing the current Track
and will begin playing the next track from the be-
ginning.
During memory playback (see “Using Memory Func-
tions” on page 14), pressing this button will skip to
the top of the next memorized track or the next disc.
Pressing this button during random playback (see
“Playing back tracks at random” on page 13) will
stop the playback, and the unit will select the next
track at random and start playing it back.
During playback, press the
/ button.
The CD changer will return to the beginning of the
current track and will begin playing back the same
track again. To jump back to the previous track,
quickly press the / button again before play-
back begins.
During memory playback, pressing this button will
skip to the top of the previous track or disc.
Pressing this button during random playback will
locate the top of the current track, not the previous
track.
• The / button is disabled when the unit is
playing back the last track of the disc or the last
stored track.
• When the first track of the disc (Track 1) or the
first stored track is being played back, the
/
button serves only to locate the top of the track.
Checking the playing time of a track
When you press the / button, the display indi-
cates the playing time of the next track, in the or-
der of the tracks on the CD.
• When you press the / button, the display
shows the playing time of the previous track.
Continuously listening to the beginning of
discs (Disc intro scan)
The “disc intro scan” function is particularly useful
for quickly checking the contents of discs.
To activate this function, press the DISC INTRO SCAN
button on the remote controller.
The CD changer will play back only the beginning
of each disc for about eight seconds.
CDC-3.1_08-13 09/05/2000, 4:24 PM11

Integra CDC-3.1 Specifications

Audio Output

number of channels	2 (stereo)
frequency response	5 Hz - 20 kHz
total harmonic distortion	0.005% (at 1 kHz)

Power

power consumption	10 watts
power supply	120 V, 60 Hz
output level	2 volts r.m.s.

Performance

dynamic range	96 dB
signal to noise ratio	92 dB
channel separation	92 dB (at 1 kHz)

Optical System

signal readout system	Optical non-contact
reading rotation	About 500 - 200 r.p.m.
linear velocity	1.2 - 1.4 m/s

Weight and Dimensions

dimensions	435× 131× 433mm
weight	6.9 kg