D-ONE – Operating instructions V01 Introduction
www.integra-biosciences.com 9
CAUTION
•Do not immerse D-ONE in liquid. The fluid can damage internal parts.
Avoid pipetting of liquids whose vapors could attack the materials PA
(polyamide), POM (polyoxymethylene), FPM (fluor-rubber), NBR (nitrile-
rubber), CR (chloroprene), silicone. Corrosive vapors could also damage
metallic parts inside the device.
• Do not modify D-ONE in any way. Repairs may only be performed by
INTEGRA Biosciences or by an authorized after-sales service member.
• Parts may be replaced with original INTEGRA Biosciences parts only.
N
OTE
Prolonged exposure of D-ONE to UV-light can cause discoloration and/or
yellowing of D-ONE housing. However, this will not affect the performance of
the device in any way.
Regardless of the listed safety notes, additional applicable regulations and guidelines of
trade associations, health authorities, trade supervisory offices, etc. must be observed.
Please visit our website www.integra-biosciences.com
on a regular basis for up to date
information regarding REACH classified chemicals contained in our products.
To Next Page
