7
• The attachment plug must be a two-pole, grounded type with a
Japanese Industrial Standard C8303 (15 A, 125 VAC)
configuration.
Other Countries
• The cord set fittings must bear the certification mark of the
agency responsible for evaluation in a specific country.
Acceptable agencies are:
BSI (UK)
OVE (Australia)
CEBEC (Belgium)
SEMKO (Sweden)
FIMKO (Finland)
DEMKO (Denmark)
NEMKO (Norway)
SETI (Finland)
EANSW (Australia)
SEV (Switzerland)
IMQ (Italy)
UTE (France)
CCC (China)
PSB (Singapore)
PSE (Japan)
BSMI (Taiwan)
B (Polish)
VDE (Germany)
SASO (Saudi Arabia)
• The flexible cord must be of a HAR (harmonized) type HO5VV-
F 3-conductor cord with a minimum conductor size of 0.03
square inches.
• The minimum specification for the flexible cord for Class II
product are: (1) 2X0.75 mm
2
conductors, (2) 2-conductor cord.
• The cord set must have a current capacity of at least 10 A and
a nominal voltage rating of 125 / 250 VAC.
MODEL E07EIx IS DESIGNED TO USE
WITH THE FOLLOWING AC ADAPTER MODEL ONLY
Manufacture: LI SHIN INTERNATIONAL ENTERPRISE CORP.
Model: 0335C2065 (65W), 0335A2065 (65W), 0225C2040 (40W)
Manufacture: HIPRO
To Next Page
Loading...
