Intel® NUC Kits NUC6CAY and NUC7ixBNx HDMI Firmware Update Guide
What this update fixes
An issue where a head mounted display would not wake up from sleep (S3) using
Windows* Mixed Reality.
An issue where high bit rate surround sound (DTS-HD MA* and Dolby True-HD) would
not work with HDMI 2.0 receivers.
An HDMI device must be plugged in for the update tool to work.
To update the Firmware
1. Download and unzip the NUC6CAY-NUC7ixBN-HDMI-Update-1.72 file.
2. Double-click BobcatAuxISPTool.exe to launch the update application.
3. To confirm the firmware is an older version and needs to be updated, select Get FW
Version.
If the HDMI device connected isn’t HDMI 2.0, the update will still work, but the
version number won’t be shown.
To Next Page
Need help?
General
