Intel D101GGC

Intel
®
Desktop Board D101GGC Specification Update
6
can override the auto-configuration options by specifying manual
configuration in the BIOS Setup program.
To use ATA-66/100 features the following items are required:
• An ATA-66/100 peripheral device
• An ATA-66/100 compatible cable
• ATA-66/100 operating system device drivers

NOTE
Do not connect an ATA device as a slave on the same IDE cable
as an ATAPI master device. For example, do not connect an ATA
hard drive as a slave to an ATAPI CD-ROM drive.